P
Printables
Delta-P fan duct V2-R2 for Slice Copperhead Hotend
This is a remix of the mount to allow for use with the copperhead hotend as well as the MMU remix.
Search results: copperhead
Counting matching models…
P
Printables
Adapter to fit Slice engineering Copperhead with Screw mount heatsink to LGX Lite
required: 2 M2.5 x 12mm Countersunk screws 4 M3 x 8mm Countersunk screws 32mm Ptfe tube Should be able to print with FDM but i designed it for Resin printers or SLS. I designed this to use on my seckit sk tank
P
Printables
High flow fan duct for MINI+ with Copperhead
This model attempts to direct the print fan's airflow closer to the nozzle tip when using Slice Engineering's Copperhead on Prusa MINI+ Notes and warnings: I'm using an ultra low profile cover for the heatbed power cables; bed levelling…
P
Printables
Copperhead Inspired Chibi
This is my attempt at a Copperhead from G.I. Joe. You may need to resize this model to fit your needs.
P
Printables
Modification of Original MK3S+ Extruder to fits Slice Engeneering Copperhead Hotend
I tried a "little" workaround on the original Prusa MK3S+ files, so that the Slice Engineering Copperhead Hotend fits on my Prusa i3MK3S(+) with MMU2S I upgraded my MK3S to the new “plus” iteration, so i had to modify the original MK3S+…
P
Printables
PTFE Collet Retaining Ring - Slice Engineering Copperhead
I bought a used Prusa MINI+ which had been upgraded with a Slice Engineering Copperhead Hotend. The machine was missing a hot-side PTFE collet clip. PTFE collets without clips have a tendency to allow up/down movement of bowden tube upon…
P
Printables
SecKit SK-Tank Orbiter 1.5 Copperhead Mount
This is a mounting platform for my extruder/hot-end and ABL sensor on the SecKit SK-Tank. I'm using the orbiter v1.5 extruder with a Slice Engineering Copperhead hot end. I also decided to use a BL Touch instead of the inductive probe.…
P
Printables
Hotend fan mount for Bondtech LGX with Slice Engineering Copperhead
Hot end fan mount for the Bondtech LGX with the Slice Engineering Copperhead for the LGX hot end. To be combined with the LGX part fan fan shroud that can be found at the website of Bondtech for free. Suitable for a 4010 hotend fan and a…
P
Printables
Effector Kossel E3D V6 + Copperhead Hot Block
This effector is designed for use with the E3D V6 heatsink & SliceEngineering Copperhead Hot Block. You need brass nut.
P
Printables
Sk tank LGX lite + Mosquito or Copperhead hotend setup
I have designed these parts so you can use LGX lite with mosquito hotend or copperhead, a 5015 fan duct and height adjustable fan holder. For fan duct please get it from Bondtech's support section. Its a 5015 fan shroud for DDX. I have…
P
Printables
Anycubic Chiron Copperhead Mount
This mount requires: 2 m3 x 30mm hex bolts 2 m3 x 25mm hex bolts 3 m3 x 10mm hex bolts 4 m3 nuts 2 m3 self locking nuts 3 m4 x 5mm hex bolts 3 m3 x 8mm hex bolt 2 m4 x 20mm hex bolts 2 m4 nuts Installation Insert 2 m3 nuts into the back…
P
Printables
Slice Eng Copperhead fan shroud & mount
Bought a Slice Engineering Copperhead a while ago and finally got to installing. However, needed a part cooling fan shroud and couldn't find one that fit my needs on my Tronxy X5S, but I did find one that I thought could be a good…
P
Printables
Sidewinder X1 Bondtech LGX with Copperhead mounting plate
Artillery Sidewinder X1 mounting plate for the Bondtech LGX with Copperhead extruder upgrade kit (with CopperHead hotblock) This is a remix from a Thingiverse item : https://www.thingiverse.com/thing:4860093 The extruder upgrade can be…
P
Printables
MK3S and MK2.5S Bear Copperhead Groove and Screw Mount Extruder
This extruder is a remix of the Bear Extruder for the Copperhead hot end made by Slice Engineering. I made models for both the groove mount and screw mount variants and will fit the MK3S and MK2.5S. If you are looking to buy a Copperhead…
P
Printables
Slice engineering Copperhead silicone sock mold
Having backed the Slice engineering Copperhead on Kickstarter I found myself in need of a silicone sock for the hotend. As Slice do not sell socks I decided to cast my own using the ever awesome @CNC_Kitchen's video as a guide. The mold…
P
Printables
Prusa MK3/2(s) Copperhead Groovemount Hotend Adapter
June 1, 2020 - This is a first pass at my Slice Engineering's Copperhead groove mount hot end adapter. There may/will be some changes as I test it out but I just wanted to get it out there for other early adopters. Print instructions…
P
Printables
Copperhead logo
Slice Engineering Copperhead logo. This isn’t a 3D model, but two dimensional vector graphic in .dxf file format, so it can be extruded to 3D in any CAD software.
P
Printables
MK3S & MK2S Bear Copperhead Extruder with Bondtech Idler Lever
This extruder is a remix of the Bear Extruder for the Copperhead hot end made by Slice Engineering with the addition of the bondtech idler lever arm. I made models for both the groove mount and screw mount variants and will fit the MK3S…
P
Printables
Copperhead + BMG Direct Drive for Ender 3 / CR-10(S) Tank Remix
<UPDATE: I have successfully printed PC+ at 260C for 5+ hrs with no warping of any of the parts. Also the hotend cooling with the 4010 pulling air across the heatsink worked beautifully. I have printed with PLA, PETG, and PC+ and have had…
P
Printables
Prusa Mini Copperhead™ Hotend Adapters
No additional gcode nor firmware change required! Absolute and relative positions of MINDA and nozzle are stock. PLEASE make sure to go through the entire Calibration Wizard, including setting MINDA height, after installing this thing. I…
P
Printables
Copperhead Hotend Assembly with Nozzle
Copperhead® is our series of modular, adaptable, open-source hotends, popular for upgrading Prusa 3D printers. Use these .STEP files of our fully assembled Copperhead hotend to build mounts, test fit on your printer, or do any other…
P
Printables
Copperhead Heat Breaks
Copperhead® is our series of modular, adaptable, open-source hotends, popular for upgrading Prusa 3D printers. Use these .STEP files of our wide array of Copperhead Heat Breaks to do any testing you may need to integrate Copperhead into…
P
Printables
Prusa Mini Cooling Duct for Copperhead V2
Made a cooling duct that works for the Copperhead hot block, fits with the sock and stock probe bracket. Provides air right at the nozzle. The two blue bridge tests shows the improvement made. I’ve noticed a big improvement on the small…
P
Printables
Nexus 5X bike mount Bulls Copperhead
A bike mount for the Nexus 5X (with big case) for the Bulls Copperhead bike. The round shape is not perfect, but works pretty well in combination with the two rubber bands.
P
Printables
PTFE Cutter for Copperhead C-E in Neptune 3 Pro/Plus/Max
I upgraded my Neptune 3 Pro with a Slice Engineering Copperhead C-E heatbreak and made this simple tool to cut the PTFE tube (⌀ 4 mm) at the right length (37.6 mm) and chamfer it at 120° angle. You will need a sharp scalpel to use it.…
P
Printables
Halterung Copperhead Extruder Prusa Mini
M3 Gewindeeinsätze vom 3DJake. Die Düse ist exakt an derselben Stelle, wie die Originaldüse plaziert, so dass kein Druckplatz verloren geht. The Nozzle is placed in the exact position as the original E3D nozzle, so no print room is lost.
P
Printables
Extruder MOD for SliceEngeneering Copperhead hotend + MMU2s and 3mm inner diameter PTFE tube - No load/unload issues!
This is a remix/combo + cleanup of exellent MOD by SpartanDog3D and JASII adapter for CopperHead hotend. It uses 4mm OD and 3MM ID PTFE tube to feed filament from MMU to the extruder and it solved most of my issues (still better tune the…
P
Printables
EVA3 Slice Copperhead Hotend
Couldn't find a hotend mount for the EVA3 printhead for my Slice Copperhead so I grabbed the mosquito version and made my own to fit.
P
Printables
Slice Eng Copperhead Delta P V2.2 mount
I printed the duct with GeentecPro and the mount with PETG. Mount to hotend using the Copperhead screws.
P
Printables
Slice Engineering Copperhead silicone sock mold (Remix for better fit)
This is a Remix of @Gaz . ( https://www.prusaprinters.org/de/prints/32781-slice-engineering-copperhead-silicone-sock-mold/ ) I reduced the mold from 100 to 96 percent. As a result, the silicone sock lifts better on the heater block even…
P
Printables
Screws-only version for Copperhead Hotend Fan Shroud
This is a quick remix of Cris Persi 's nice fan shroud for the Copperhead Hotend on Prusa Mini. It works with 2-4 screws, no threaded inserts needed. More sturdy than (but compatible to) JASII 's version , less vibrations. Thank you JASII…
P
Printables
Prusa Mini PINDA 2mm lower + Copperhead Screw Mount 2mm Spacer
This is a remix of Original Prusa “MINI-minda-holder” by https://github.com/prusa3d . The left side is the same but on the right side the hole for the screw that attaches to the hotend fan is lowered by 2 millimeters. You can use this to…