Slice Eng Copperhead fan shroud & mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bought a Slice Engineering Copperhead a while ago and finally got to installing. However, needed a part cooling fan…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bought a Slice Engineering Copperhead a while ago and finally got to installing. However, needed a part cooling fan shroud and couldn't find one that fit my needs on my Tronxy X5S, but I did find one that I thought could be a good starting point. However, as I didn't have have means to mount it, I designed a mounting frame that mounts to the hotend and the fan shroud is mounted to it with M3 bolt.
I did have to modify the original shroud as the original angle of the fan would have caused a collision to Tronxy frame so I changed that.
Source (OpenSCAD) can be found here: https://github.com/spegelius/3DModels/tree/master/PrinterParts/Copperhead
Print Settings
Printer:
FrankenCube
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Any PETG
Any
Notes:
I printed this in GreenTec Pro, which should be able to withstand temperatures up to 160C. However, PETG and ABS should be fine for the shroud and the frame might work even with PLA.
Assembly
Afte printing the parts should be pretty much ready to go.
The original Copperhead 2.5mm bolts are bit too short so you'll need to get 16mm M2.5 bolts.Also needed:
- 2x M3 nuts
- 1x 12mm M3 bolt
- 1x 8-10mm M3 bolt
- 2x 20+mm M3 bolts
Category: 3D Printer Parts