Prusa MK3/2(s) Copperhead Groovemount Hotend Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
June 1, 2020 - This is a first pass at my Slice Engineering's Copperhead groove mount hot end adapter.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 1674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
June 1, 2020 - This is a first pass at my Slice Engineering's Copperhead groove mount hot end adapter. There may/will be some changes as I test it out but I just wanted to get it out there for other early adopters.
Print instructions
Notes an installing:
- Assemble the Copperhead as shown in the photograph and diagram
- Insert a PTFE tube all the way into the Copperhead
- Snap the Copperhead into the Extruder Body to mark PTFE cut point
- Remove PTFE to get straight cut and bevel inside of PTFE top
- Use Prusa stock parts for fan mount, nozzle shroud and sensor assembly
Notes on printing:
- Sorry for orientation. Will fix. Print Motor Mount and cover 180 rotated
- Extruder Cover has an indent with Copperhead logo
- Also provided is the logo if you have MMU capabilities
- Standard print specs - PETG - 15% fill - .20mm Quality
Note on maintenance:
There is a small hole inside the baffle which gives you access to the heat break tension screw. This will allow you to remove (drop down) the heat break/heat block assembly without taking the extruder apart. Just remove the cooling fan to access it.
More to come....