Thinner Fan Guard for Prusa i3 MK3s+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thin fan guard, enough said.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 194
- Wydruki
- 8
- Wyświetlenia
- 855
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a very lightly modified version of J White's excellent fan guard (which is a remix of Der Peiner's). For whatever reason, I did not have enough room on my printer for their model. The printer was detecting crashes and too short of an X axis. As a result, I made a slightly thinner version. If, after printing their more elegant model (it has chamfering and mine doesn't… i can barely spell chamfer) you find that it is too thick for your printer, try this one out.
No support needed, I went with .15 layer height in when I sliced. It's a quick print. I strongly recommend printing in PETG, since it will be so close to heat.