1 / 4
Tops Knives Belt Clip Spacer — zdjęcie 1
1 / 4

Tops Knives Belt Clip Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacer for 1.5 in belts for the 2.25 in belt clip from Tops Knives

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
0
Wyświetlenia
136
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Belt clip insert for the Tops knives 2.25 in belt clip. Cant find a listing for just the clip only but it is the one that comes with the El Pionero and I suspect that the clip is used on other sheathes. It uses an M2.5 threaded insert and a m2.5x3 machine screw. I used a cap head but most any will work. Use with a washer to lock the clip shut.

The no hardware version has not been tested but has a protrusion to interface with the slot in the clip to snap in. I was potentially going to model one that only uses a m2.5 or m3 nut instead of an insert but its not high on my list of things to do. 

Printed in the modeled orientation with supports but I'm not sure it matters too much for this model

Tagi