Functional Wrist Cuffs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Engineered for hassle-free printing in a single process without the need for assembly post-printing.
- Ocena
- 0 / 5
- Polubienia
- 15
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Standard Digital File License
This 3D printable design features wrist cuffs linked by a chain, engineered for hassle-free printing in a single process without the need for assembly post-printing.
Printing Settings
- Filament Material: PLA
- Layer Resolution: 0.2 mm
- Infill Percentage: 15%
- Supports: No
- Brim: No
- Bed Temperature: 60°C
- Nozzle Temperature: 210°C
Printing Information
- Nozzle Size: 0.4mm
- Estimated Printing Time: Approximately 10 hours 35 minutes
- Print Volume: 246mm (width) x 189mm (depth) x 33mm (height)
- Printer Used: Prusa i3 MK3S
- Slicing Software Used: PrusaSlicer
Additional Information
Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.