1 / 3
Funnel for KID'nR Silica Gel Canister — zdjęcie 1
1 / 3

Funnel for KID'nR Silica Gel Canister

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Funnel for KID'nR filament spool silica gel canister.

Ocena
5 / 5
Polubienia
20
Pobrania
99
Wydruki
3
Wyświetlenia
247
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

First, thanks to DET-Man for the original models. They work great, but I wanted an easier way to fill the canisters with silica gel. I modified the cap with a funnel for this purpose. This was made for the canister with a core, but should work for all three types of canisters.

I have made versions for all the filament spools listed for the original canister designs - plus Hatchbox. Here are the spool inside diameters used:

  • 3D Jake: ID = 52.0mm
  • Amazon Basics: ID = 54.0mm
  • Ambrosia: ID = 52.0mm
  • Bambu Lab Reusable Spool: ID = 54.8mm
  • Elegoo: ID = 53.0mm
  • eSUN: ID = 53.0mm
  • Extrudr: ID = 52.0mm
  • Fillamentum: ID = 52.8mm
  • Prusament: ID = 51.2mm
  • Polymaker: ID = 55.4mm
  • Protopasta: ID = 52.0mm
  • Hatchbox: ID = 54.8mm

Please note I do not own most of these filaments. I have only personally tested Prusament and Hatchbox.

For print set up you should not need to use supports, however you will need to add a custom brim to stabilize the center portion. The brim should be the same height as your first layer setting (see example image below).

Tagi