Funnel for KID'nR Silica Gel Canister
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Funnel for KID'nR filament spool silica gel canister.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 100
- Makes
- 3
- Views
- 248
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
First, thanks to DET-Man for the original models. They work great, but I wanted an easier way to fill the canisters with silica gel. I modified the cap with a funnel for this purpose. This was made for the canister with a core, but should work for all three types of canisters.
I have made versions for all the filament spools listed for the original canister designs - plus Hatchbox. Here are the spool inside diameters used:
- 3D Jake: ID = 52.0mm
- Amazon Basics: ID = 54.0mm
- Ambrosia: ID = 52.0mm
- Bambu Lab Reusable Spool: ID = 54.8mm
- Elegoo: ID = 53.0mm
- eSUN: ID = 53.0mm
- Extrudr: ID = 52.0mm
- Fillamentum: ID = 52.8mm
- Prusament: ID = 51.2mm
- Polymaker: ID = 55.4mm
- Protopasta: ID = 52.0mm
- Hatchbox: ID = 54.8mm
Please note I do not own most of these filaments. I have only personally tested Prusament and Hatchbox.
For print set up you should not need to use supports, however you will need to add a custom brim to stabilize the center portion. The brim should be the same height as your first layer setting (see example image below).
