Creality Hi Light Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 Different designs to place a light bar on your Creality Hi.
- Ocena
- 5 / 5
- Polubienia
- 109
- Pobrania
- 560
- Wydruki
- 5
- Wyświetlenia
- 2744
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is 3 designs for a light bar on the Creality Hi. Print 2 arms of any design of your choosing.
-Universal: This is for you to modify as you’d like or can be used with adhesive backed lighting options.
-For 10mm Channel: Print this and the 10mm channel for use with a 10mm LED strip of your choosing. 10mm channel can be printed if rotated 45°
-For cabinet light: To be used with this cabinet light from Amazon.https://www.amazon.com/dp/B0DFCMXJ52?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1Print any pf the arms on their side.
Print the 10mm channel on its back if you are using it. The arms of any one of the designs clips onto the top bar of the Creality Hi.The LED channel slides in the arms for the LED channel then you add you own 10mm LED light strip. The linked light should also slide easily into the arm printed for the cabinet light.
I tried to design this with a side mounted CFS buffer in mind and to clear the extruder when fully raised. The PTF tube may rub a bit depending on how long you have cut it.