1 / 1
Extruder cable tuck clip for Creality K1 Series — zdjęcie 1

Extruder cable tuck clip for Creality K1 Series

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sometimes cables can get caught or pulled out at the rear or right side of the printer. Keep them tucked in with this!

Ocena
5 / 5
Polubienia
50
Pobrania
221
Wydruki
2
Wyświetlenia
1675
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Sometimes toolhead cables (extruder, filament sensor, hotend etc) can get caught, damaged or pulled out at the rear or right side of the printer during large prints, nozzle wiping and homing. This can also offset the homing.

This is more likely to happen when upgrading to the CFS or upgrading the extruder and making the cable too long or using an adapter cable for the new toolhead board.

This is a simple and virtually free solution for people who have broken the factory cable channel or need to secure more cables

You will need 2x 10mm M2 screws and nuts

Tagi