1 / 6
Prusa Enclosure Desiccant Gel Holder — zdjęcie 1
1 / 6

Prusa Enclosure Desiccant Gel Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A desiccant gel holder that can be installed in the prusa enclosure to add a bit of passive moisture absorbtion.

Ocena
5 / 5
Polubienia
41
Pobrania
69
Wydruki
2
Wyświetlenia
624
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

A desiccant gel holder that can be installed in the prusa enclosure to add a bit of passive moisture absorbtion. Can be mounted using any of the 3mm holes on the enclosure frame.

You can use the spare M3n black nut and the M3X4 parts that come with the MK4S or similar models for assembly or any M3 nut / bolt combo will work. 

The slots are 2.5mm wide so any desiccant gel beads larger then 2.5mm should work no problem. Designed to print pretty quickly and use little material, while also blending in with the enclosure.

Tagi