1 / 5
IKEA Muskot self watering plant liner - pot (two versions) — zdjęcie 1
1 / 5

IKEA Muskot self watering plant liner - pot (two versions)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

IKEA Muskot self watering plant liner - pot

Ocena
0 / 5
Polubienia
19
Pobrania
55
Wydruki
0
Wyświetlenia
519
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Self watering liner for the IKEA MUSKOT 9 cm version POT

There are two version of the liner (see pictures):

  1. liner with channel/canal to fill the reservoir without removing the liner from the pot
  2. liner without the channel/canal

The rim of the liner has a lip that facilitates the removal of the liner from the pot (see pictures).

Diameter of the holes for the wicks is 6 mm. A space of approx. 23 mm remains between the underside of the liner and the uppurside of the bottom of the pot.

Can be printed with PLA using a 0.6 mm nozzle (as in the pictures), no supports needed.

Available file formats: .3mf, .stl.

I own four pieces of the muskot pot purchased at two different times, I have noticed that they are not perfectly identical in size (difference of approx. 3 mm in diameter). The model is calibrated on the pot with smaller dimensions.

PS: if you have a 12 cm Muskot pot, just scale the model in your slicer. I would have uploaded the model myself, but I only own the 9 cm version.

Tagi