Yaesu FTDX10 Speaker Reflector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic forward facing reflector horn for Yaesu FTDX10's upward firing speaker.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model helps reflect the upward firing speaker forward for easier listening, especially out in the field for POTA. Magnets are seated right before the layer covering them (pause at layer 16). The 3MF file has the pause and support enforcement generated. I only found support was needed under its “chin” to prevent loops and sagging.
I used these 6x3 magnets from Amazon.
This will probably work with other radios whose speaker is 76mm ø and have enough room for the total base diameter of 96mm.
Printer: Prusa Mk4 with Input Shaping
Material: Prusament Jet Black PETG (will work with PLA too if you plan to keep it in the shack)
Profile: 0.20mm SPEED
Infill: 15%
Supports: Organic enforced under chin area only
Print time: 5:44
Weight: 98g