Anycubic Kobra Neo Chassis for BTT SKR Mini E3 V3, EBB42, and U2C boards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New chassis for the Anycubic Kobra Neo to fit the BTT SKR Mini E3 V3, EBB42, and the U2C.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 486
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Now, the mainboard chassis for the OEM Kobra Neo mainboard does not fit an SKR Mini E3 V3, let alone adding the EBB42 to the same area. Side note: I have the EBB42 down in the mainboard chassis for now and not mounted on the printhead, primarily because of the metal flange behind the 42-22 Nema 17 motor. I designed my own printable chassis for the SKR Mini E3 V3 and the EBB42. It slides in and screws in using the existing mounting positions for original mainboard chassis. I installed two 70x10mm fans to cool the SKR Mini E3 V3 and the EBB42.
I have probably over engineered this and ended up using way more screws and heat inserts than necessary, but I didn't want it to droop when I installed the new chassis.
Bill of Materials:
- Fourty-three (43) M3x5.7 brass heat inserts
- Twelve (12) M3x6 countersunk screws (used to attach front panels and Y-axis supports to compartments)
- Six (6) M3x10 countersunk screws (used to secure the two compartments together)
- Thirteen (13) M3x6 socket head cap screws (used secure mainboards to positions)
- Twelve (12) M3x8 socket head cap screws (used to secure bottom lids to the compartments)
- Eight (8) M3x10 self-tapping screws (attaches 70mm fans to bottom lids)
- Six (6) M3x6 self-tapping screws (secures left and right rail attachments to the compartments)
- Four (4) OEM M3x14 countersunk screws (used to secure the new chassis to the frame just like the OEM screws)
- Two (2) OEM M3x20 socket head cap screws (used to secure the new chassis to the frame just like the OEM screws)
- Two (2) 70x10mm fans
- One (1) BTT SKR Mini E3 V3
- One (1) Micro USB 90 Degree Angled up Male to Micro USB Female Receptacle (I didn't make the gap big enough for a normal micro USB to fit and didn't want to redesign and reprint)
- Optional
- One (1) BTT EBB42 (to enable Z_TILT_ADJUST)
- One (1) BTT U2C (to reduce the number of USBs needed on the controller)
- One (1) BTT Pad7