Anycubic Kobra Neo Chassis for BTT SKR Mini E3 V3, EBB42, and U2C boards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New chassis for the Anycubic Kobra Neo to fit the BTT SKR Mini E3 V3, EBB42, and the U2C.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 34
- Makes
- 0
- Views
- 486
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
Now, the mainboard chassis for the OEM Kobra Neo mainboard does not fit an SKR Mini E3 V3, let alone adding the EBB42 to the same area. Side note: I have the EBB42 down in the mainboard chassis for now and not mounted on the printhead, primarily because of the metal flange behind the 42-22 Nema 17 motor. I designed my own printable chassis for the SKR Mini E3 V3 and the EBB42. It slides in and screws in using the existing mounting positions for original mainboard chassis. I installed two 70x10mm fans to cool the SKR Mini E3 V3 and the EBB42.
I have probably over engineered this and ended up using way more screws and heat inserts than necessary, but I didn't want it to droop when I installed the new chassis.
Bill of Materials:
- Fourty-three (43) M3x5.7 brass heat inserts
- Twelve (12) M3x6 countersunk screws (used to attach front panels and Y-axis supports to compartments)
- Six (6) M3x10 countersunk screws (used to secure the two compartments together)
- Thirteen (13) M3x6 socket head cap screws (used secure mainboards to positions)
- Twelve (12) M3x8 socket head cap screws (used to secure bottom lids to the compartments)
- Eight (8) M3x10 self-tapping screws (attaches 70mm fans to bottom lids)
- Six (6) M3x6 self-tapping screws (secures left and right rail attachments to the compartments)
- Four (4) OEM M3x14 countersunk screws (used to secure the new chassis to the frame just like the OEM screws)
- Two (2) OEM M3x20 socket head cap screws (used to secure the new chassis to the frame just like the OEM screws)
- Two (2) 70x10mm fans
- One (1) BTT SKR Mini E3 V3
- One (1) Micro USB 90 Degree Angled up Male to Micro USB Female Receptacle (I didn't make the gap big enough for a normal micro USB to fit and didn't want to redesign and reprint)
- Optional
- One (1) BTT EBB42 (to enable Z_TILT_ADJUST)
- One (1) BTT U2C (to reduce the number of USBs needed on the controller)
- One (1) BTT Pad7