P
PrintablesMaverick Ng
BigTreeTecg CanBus U2C board clip mount - Voron 2.4
BigTreeTecg CanBus U2C board clip mount - Voron 2.4
- Downloads
- 2,178
- Likes
- 129
- Rating
- 5
Search results: u2c
Counting matching models…
P
Printablesmmuellerphoto
BTT U2C DIN Rail Mount
This is a BTT U2C Mount for my DIN Rail Bracket. You can find the bracket here ! For the U2C you need M3 flat head screws and M3 Nuts. For the DIN Rail Bracket Mount you need M3 countersunk screws. If you like what I do feel free to buy…
- Downloads
- 1,661
- Likes
- 107
- Rating
- 5
P
PrintablesTurge
Mellow FLY-UTOC or BTT U2C DIN Mount
Mount Mellow UTOC or U2C to DIN using this PCB DIN Clip . Attach mount to PCB DIN Clip with 2 M2 or M2.5 self tapping screws Attach UTOC or U2C to mount using 2 or 4 M3 x 6mm or 8mm
- Downloads
- 1,626
- Likes
- 78
- Rating
- 4.93
P
PrintablesJ_Cross
Mounting Bracket/Case for Big Tree Tech U2C and Mellow UTOC Can Bus Boards
I made this model so I can mount a BTT u2C to my klipperized Anycubic Chiron. This will work with just about anything, though. I now have it installed on the Chiron, a modified VzBot, a ratrig Vcore 3.1, and a Voron 2.4. It uses 2 screws…
- Downloads
- 829
- Likes
- 86
- Rating
- 4.8
P
PrintablesAugustBackhaus
BTT U2C Mount (DIN Rail)
Mounting bracket for the BigTreeTech (BTT) U2C CANBUS Board for mounting on DIN rails. The bracket is attached to the Voron DIN Clip ( GitHub Link ) with 2x M2x10 self-tapping screws, while the board itself is attached with 4x M2x10…
- Downloads
- 791
- Likes
- 23
- Rating
- 4
P
PrintablesScops Owl Designs
Bigtreetech U2C Mount
Bigtreetech u2c mount for Voron Mounting bracket designed for mounting a Bigtreetech U2C to the frame. Suitable for various printers. Files contains two designs one in voron style and one blank design Required material per hinge: 4x Self…
- Downloads
- 733
- Likes
- 70
- Rating
- 5
P
PrintablesDrak
BTT CanBus U2C board Case DIN Rail Mount - Drak
=== BTT U2C Case === === Pictures === Recommended print material: PETG, ABS, ASA Hardware: x4 M3 30mm (can be two, like on the photos) x2 M3 8mm x2 heatinsert (Voron style or Od 4mm from Aliexpress) Changelog (day/month/year): 01.09.2024…
- Downloads
- 441
- Likes
- 59
- Rating
- 4.67
P
PrintablesKejar31
U2C mount for Switchwire
Basic Switchwire or Enderwire mount for a U2C. You will need 2 M5 10mm screws and t-nuts to mount this.. Then 4 M3 6mm (4 or 8 will work too) to mount the U2C to the mount.
- Downloads
- 342
- Likes
- 46
- Rating
- 4.67
P
PrintablesOseo
FLY UTOC/BTT U2C DIN rail mount
Required parts: 1x Low-profile DIN rail clip 4x M3x5x4 brass insert (Voron BOM standard insert) 6x M3x6 button head screw (ISO 7380) Triangle symbol on the mount shows correct orientation with the clip. Print settings: 0.2mm layer height…
- Downloads
- 341
- Likes
- 28
- Rating
- 5
P
PrintablesScott
Mounting Bracket for Bigtreetech U2C 2.1 can board
Mounting Bracket for Bigtreetech U2C 2.1 can board, M3x8mm machine screws to attach board to bracket
- Downloads
- 261
- Likes
- 13
- Rating
- 5
P
PrintablesOldGuyMeltsPlastic
V0.2 U2C Mount Plate
U2C mounts underneath and between the two A & B motors, right where the LDO Picobilical UMB was previously. If your USB cable that connects to the U2C has a long head, you may need to use a 90 degree adaptor or cable.
- Downloads
- 224
- Likes
- 31
- Rating
- 4.83
P
Printables3dKaos
SKR Mini E3V3 - RPI - U2C - LM2596 Mainboard Case
Remix of parts of two main board boxes. This is set up to hold SKR Mini E3V3, RPI, U2C Canbus and LM2596 Buck Converter Mount holes are at 2.80mm so should self tap M3 Holes on the right of the case are for M5 Heat Inserts RPI fan is for…
- Downloads
- 220
- Likes
- 29
- Rating
- 0
P
PrintablesPedro Braz
BTT U2C Snap-Fit Case
Edit 1: snap-fit is not good right now, sorry for that. I'll try to learn a better design. Cad files are available for contribution. Snap-Fit case for BTT U2C I printed it in PETG using a 0.4 nozzle, 0.2 layer height, 15% infill, 4 wall…
- Downloads
- 209
- Likes
- 19
- Rating
- 4.67
P
PrintablesJ_Cross
Big Tree Tech U2C rough CAD Model
I used this model to create a mounting bracket since BTT didnt have one on their github. This is only for the U2C 1.0 and 2.0. The 1.1 and 2.1 have additional connectors you would have to model in order to make a case.
- Downloads
- 208
- Likes
- 10
- Rating
- 0
P
PrintablesYell
U2C Voron style DIN Mount
see description. print in ABS/ASA/PETG, PLA on the clamps in good or better limited use
- Downloads
- 199
- Likes
- 12
- Rating
- 5
P
PrintablesSirNut
Improved BTT U2C Snap-Lock Case
I added snap-lock tabs to hold the two pieces of the case by @PedroBraz_1666913 together better
- Downloads
- 131
- Likes
- 19
- Rating
- 5
P
Printableschrisf4lc0n
SV08 U2C Mount
For those of you who will plan to move to some CAN board, you would probably need U2C or some other USB to CAN adapter, this is a simple mount for he BTT U2C on SV08. Printed in ABS, but PETG or even PLA should suffice, it is not too hot…
- Downloads
- 127
- Likes
- 21
- Rating
- 0
P
PrintablesSvennixx
Bigtreetech U2C Mount heatset inserts
Remix of the great yet simple mount from Tom. Added heatset insert holes on the bottom side of the mounting plate.
- Downloads
- 107
- Likes
- 14
- Rating
- 5
P
PrintablesFalkien
BigTreeTech U2C mount
Needed to add a mount for my Voron that was easy to mount anywhere on the side. This can be placed anywhere on the side extrusion. I added the STEP file so anyone can adjust the length. Mount U2C with (4) 6x3mm screws and (2) 8x3mm screws…
- Downloads
- 88
- Likes
- 9
- Rating
- 0
P
PrintablesKeiranSolaris
V0.2 U2C Mount Plate w/ Strain Relief
Needs an M3 button head screw, an M3 heatset insert into the tower, and zip ties. Mirror the strain relief tower if you want to use the molex microfit instead of the white minifit.
- Downloads
- 68
- Likes
- 11
- Rating
- 5
P
PrintablesSwitch-Witch VS VT V02
V0.2 - Lit with U2C support for the FT cable management
Lit with U2C support for the FT cable management V0.2 https://www.printables.com/model/477791-ft-voron-v02-electronic-boards-and-cable-managemen/comments#preview-comment To mount the U2C to the lit you need 4 M3 heat inserts. Changed the…
- Downloads
- 63
- Likes
- 6
- Rating
- 0
P
PrintablesCowboy124aa
U2C board mount for SV08
Print Settings Filament type: PETG or ABS .4mm nozzle .20 mm layer height 4 walls No supports (unless your horizonal screw holes does not print well) 15 percent infill Honeycomb Harware Needed for mounting the board to the mount 4 x M3 x…
- Downloads
- 58
- Likes
- 7
- Rating
- 5
P
PrintablesBootStrap
U2C Din Rail Bracket - Fits (mmuellerphoto)
I could not find a bracket for the U2C that would fit one of the Din Rail mounts published by mmuellerphoto.
- Downloads
- 58
- Likes
- 0
- Rating
- 0
P
PrintablesHyperV3D
FT - Cable Duct Cover w U2C board
My thanks to Fizzy (@fizzystech) for the original models. https://www.printables.com/model/553387-ft-ems-voron-v02-v2-electronics-management-system/files
- Downloads
- 55
- Likes
- 4
- Rating
- 0
P
Printablesedgy
OmniBox Lower Bay Short Tray for BTT U2C
This is a short lower bay tray for the OmniBox to mount a BTT U2C (USB to CAN) board. Intended to be used in the middle bays with the extended tab towards the rear. Because of the green terminal block on the one end, you may find that you…
- Downloads
- 51
- Likes
- 7
- Rating
- 5
P
PrintablesCrys' Livingroom Workbench
Enderwire BigTreeTech M4P mount / Fysect U2C can mount / 8010 fan mount
This is a mount for the M4P in the Switchwire. It's REALLY tight. You need 90º USB adapters to use the USB ports on the M4P, but this blocks the Ethernet port. Installation: I also added a mount for an 8010 fan to cool the steppers, this…
- Downloads
- 35
- Likes
- 4
- Rating
- 0
P
PrintablesPablovsky
V0.2 A/B plate umbilical pass (with optional U2C mount)
I was looking for a plate that not only would let me pass the CAN cable to the toolhead but also had passes for extra chamber stuff like LEDs and sensors. Since I didn't quite liked anything I made some right here. What you can choose…
- Downloads
- 34
- Likes
- 8
- Rating
- 5
P
PrintablesFormulaNerd3D
Anycubic Kobra Neo Chassis for BTT SKR Mini E3 V3, EBB42, and U2C boards
Now, the mainboard chassis for the OEM Kobra Neo mainboard does not fit an SKR Mini E3 V3, let alone adding the EBB42 to the same area. Side note: I have the EBB42 down in the mainboard chassis for now and not mounted on the printhead,…
- Downloads
- 34
- Likes
- 9
- Rating
- 0
P
Printablesss1gohan13
Ender 3 Pro Pi3, Pi5, case with U2C support
Was building another E3Pro and needed a spot to mount the U2C I was using. Added a USB-C port and mounting for U2C.
- Downloads
- 33
- Likes
- 7
- Rating
- 0
P
Printablesinnercube
BTT U2C DIN Rail Mount Remix
Please use the same brackets from mmuellerphoto like the original model.
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesBrithim
V0.2 U2C PG7 Mount Plate
I made the poles beefy and can handle a lot of mangling, Plus a PG7 Connector. I'll update if it doesn't fit the connector. *I've printed the Tall/Non-Short One & It has a huge gap to run a cable vs. the Short might not Make sure to…
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
Printablesamekyras
U2C cover plate with PG7 cable gland hole for V0.2
Added a hole to affix a PG7 cable gland, lengthened and filleted the heatsert points to avoid interference with the U2C cable, and removed the border. Also added cutouts for RGB stick wires etc. Apologies for somewhat brutalising the CAD!
- Downloads
- 28
- Likes
- 1
- Rating
- 1
P
PrintablesNikosSprocket
Combined rail mount for Raspberry Pi 4 and BTT U2C CAN board
There are 2 versions available; Short and Long. Depends on the space available between the BTT U2C board and the printer's side panels. Also, included an easily printable spacers to include between the boards and the rail mount.
- Downloads
- 26
- Likes
- 5
- Rating
- 0
P
PrintablesShaggy
U2C mount for 2020
All you will need is: x4 Voron standard heat set inserts x4 M3 30mm 2x M3 Tnuts 2x M3x8
- Downloads
- 24
- Likes
- 5
- Rating
- 0
P
PrintablesBreacor3D
CR-10S Pro SKR 2 case with BTT U2C Mount
This is a remix of https://www.thingiverse.com/thing:4536022, modified specifically for use with a BTT (BigTreeTech) U2C Canbus board as the stock creality breakout boards have failed on my printer. (printables won't let me use the remix…
- Downloads
- 24
- Likes
- 4
- Rating
- 0
P
PrintablesSRAsolutions
BTT U2C small & large case (BigTreeTech)
I designed two custom 3D‑printable enclosures for the BigTreeTech U2C CANbus converter, available in both small and large form factors. The goal was to create clean, functional housings that improve cable management, protect the board,…
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
PrintablesHells
Ender 3 Pro LCD + Raspberri Pi 3B + BTT U2C + LM2596
I wanted this case for my Ender 3 Pro and couldn't find one for the Raspberry Pi 3B. This model adjusts for that, has better screw and printing geometry. I also added a version with Wago bar mounts that I changed for my use.
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesTitanOX
Fysetc UCAN 1515 bracket U2C Voron 0
designed for 1515mm alu extrusion.
- Downloads
- 16
- Likes
- 4
- Rating
- 0
P
PrintablesXVIIarcano
Voron skirt holder for BTT U2C
A little holder that goes in the hex pattern of the voron skirts (modeled and tested on the TinyT version) and has two prongs spaced for the dual USB port on the BTT U2C (USB to CAN adapter) to hold it if you do not have better hard…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesIgor
Ender3 Pro Rear electronic left enclosure with U2C and Wago221 mounts
Remix of TeachingTech left Raspberry enclosure with additional U2C and WAGO ( kl4appdrachen ) mounts. You should use 25cm right angle USB cable to connect U2C to main Raspberry board.
- Downloads
- 11
- Likes
- 3
- Rating
- 0
P
PrintablesNewlanderDesign
Voron 0 CanBus U2C Molex Stabilizer
Got tired of cables that bending of the connectors from Molex Micro 3.0 on my Voron 0 with EBB36 Canbus. Here is a stabilizer for BTT U2C v2.1 to solve the problem. Can use a extra zipties if the connector (Molex 4-pins) tries to slide of…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesJan Drška
RatRig Minion úchyt BTT U2C / RatRig Minion BTT U2C holder
RatRig Minion – CAN mod držák (náhrada za RPi pozici) Držák pro upgrade tiskárny RatRig Minion na CAN komunikaci. Umožňuje instalaci CAN převodníku na původní pozici Raspberry Pi a přesunutí RPi k displeji TFT50 , kde je umístěno do…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesHunex
Ender 3 Neo / V2 - BTT U2C (2.1) Enclosure
U2C v2.1 enclosure for Ender 3 Neo / V2, inspired by orestes' design, but made from scratch entirely. I made the model back in '24, but forgot to publish the model. Been using it ever since with no issues. Started the design with a…
- Downloads
- 3
- Likes
- 2
- Rating
- 0
P
PrintablesBootStrap
Rook 2020 MK1/2 - Mounting board for 2 Wago, RPi Zero, and U2C
For those who want to add CAN bus to their Rook here is a handle mount that fits under the rook.
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printables
Rook 2020 MK1/2 - Mounting board for 2 Wago, RPi Zero, and U2C
For those who want to add CAN bus to their Rook here is a handle mount that fits under the rook.
P
Printables
Raspberry Pi, BTT SKR 1.2 Pro, BTT U2C, fan mount
A mount for the Raspberry Pi, BTT SKR 1.2 Pro, BTT U2C, 2 fan mount that can be put on Din rails or any other surface use M3x5.7 inserts 2 5010 fans
P
Printables
RatRig Minion úchyt BTT U2C / RatRig Minion BTT U2C holder
RatRig Minion – CAN mod držák (náhrada za RPi pozici) Držák pro upgrade tiskárny RatRig Minion na CAN komunikaci. Umožňuje instalaci CAN převodníku na původní pozici Raspberry Pi a přesunutí RPi k displeji TFT50 , kde je umístěno do…
P
Printables
BTT U2C Din CASE (Car Style)
This case is for BTT U2c V2.1 and it's styled by car module cases and can be used with normal hard mounting and din rail mounts. The ones i used are : https://aliexpress.com/item/1005006226938330.html Please leave a comment and like if…
P
Printables
Improved BTT U2C Snap-Lock Case for V slot profile
This remix has thicker base with two slots for M4 holes and can be screwed into V slot profile on the printer. Also I've included plain top of the case without hex pattern.
P
Printables
BigTreeTech U2C (v2.1) Case and Mount for 2040, 4040 Extrusions
Case and mount for the Big Tree Tech U2C (v2.1) canbus board. Designed to attach to any --40 aluminum extrusion, such as 2040 and 4040 extrusions. No heat-set inserts used; screws directly into the plastic. Mounting screws to the __40…
P
Printables
Ender 3 Pro LCD + Raspberry Pi 4 + BTT U2C + LM2596 Case
Refer to the linked remix for more information, I just added some mounting holes to their remix.
P
Printables
Raspberry Pi, BTT SKR 1.2 Pro, BTT U2C, fan mount
A mount for the Raspberry Pi, BTT SKR 1.2 Pro, BTT U2C, 2 fan mount that can be put on Din rails or any other surface use M3x5.7 inserts 2 5010 fans
P
Printables
U2C Horizontal DIN mount (Brass Inserts)
Using these DIN rail mounts , this lets you mount a BigtreeTech U2C board horizontally. This model uses M3 brass heat inserts. 4.6 OD should work fine.
P
Printables
Ender 3 BTT U2C v2.1 Enclosure/Mount
Designed to “work” with my MKS Pi mount . Well that isn't to say that it won't work without it, but I have designed it to sit flush with the stock electronics enclosure aluminum cover when the aforementioned Pi mount is in place, which…
P
Printables
V0.2 U2C Mount Plate Mod
U2C mounts underneath and between the two A & B motors, right where the LDO Picobilical UMB was previously. If your USB cable that connects to the U2C has a long head, you may need to use a 90 degree adaptor or cable.