Enderwire BigTreeTech M4P mount / Fysect U2C can mount / 8010 fan mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the BTT M4P with a 8010 fan and a CAN adapter
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mount for the M4P in the Switchwire. It's REALLY tight. You need 90º USB adapters to use the USB ports on the M4P, but this blocks the Ethernet port.
Installation:
I also added a mount for an 8010 fan to cool the steppers, this is optional. I use an ID cooling 8010 fan with 12V, you get these on Ali very cheap and they are very quiet. An RGB version of this fan does exist :D Combine with a compact buck converter. The fan grill is from here: https://www.printables.com/model/599418-meanwell-ls350-cover-for-80mm-fan/files
For the fan you need an 80mm drill to cut the hole in the bottom panel.
To connect the U2C, use the vertical USB port on the M4P and a 10cm USB-A to USB-C cable.
Fan mount needs to be printed with supports!
- 3x M3x25 screws for the fan adapter
- 4x M3x10-12 for the mainboard (only 1x if using the fan adapter)
- 4x standard heatset insert (7x if using the fan adapter)
- 3x M3x12 when using the fan adapter
- Some felt gliders for chairs, I added them on top of the fan corners to prevent the fan from touching the bottom panel