30 models
This is intended for the Ender 3 Pro, but will probably work fine on other printers with minor tweaking. My goal was to keep most of the ports accessible. The internal USB one may be usable with a 90-degree USB cable. Ferrule connectors…
I'm converting an Ender 3 Pro to a Voron Switchwire and I bought the BIGTREETECH Manta M4P/M8P Control Board (https://biqu.equipment/products/manta-m4p-m8p). I needed a way to mount the board in the electronics area so I made this mount.…
Update: 12/05/2023- ADD step files As there was no case for the Manta M4P, I designed my own version. With this setup, the EXP connectors are inoperative, I can change the box if someone wants to use them, it's a matter of changing the…
Pedana per monopattino Kugoo M4pro con triplice funzione di poggia piede, maniglia per sollevare il monopattino e contenitore per l'allarme. Doppio punto di fissaggio; Alla pedana ed agli ammortizzatori. Da stampare in PETG - ABS - ASA…
The bracket is designed for the Voron Switchwire so that you can mount a Manta M4P board in the Switchwire.
FLSUN Super Racer Manta M4P Mount
This case is designed to attach to 2020 extrusion through the back using 2 m5x10 and t-nuts. The lid is fastened with 4 m3x10 (or 8, 12, &16) screwed into the plastic. There are two lids to pick from, one that uses a single 80mm fan, or…
Overview: This enclosure fits a Manta M4P and 2 4010 fans to your Ender 3 V2. This model uses M3 heat-set inserts to help secure the motherboard and top pieces - you'll need to edit the STEP files if you want to bolt directly into the…
Fit your BTT Manta M4P on your Rook Maybe use a little supports Like my work? Support me on Ko-fi!
SKR Manta M4P mainboard I made a video guide to using this mainboard and Pi substitute: Please note that the M8P board is a similar concept, but has a different mounting pattern so is incompatible with this adaptor without modification.…
Electronics Enclosure for Sovol SV06/SV06 Plus Upgrade your Sovol SV06 or SV06 Plus with this custom electronics enclosure, designed for the BTT Manta M4P . This compact enclosure replaces the stock housing while using the original hinges…
Modified version of the case to use a 92mm fan on top and use to the original mounting points on the SV06. Has a little shelf at the top to fix the extruder flat cable with a zip tie. Optionally can mount an SMA extension for an external…
Bigtreetech Manta M4P mount on din rails for the Ender 3 NG 1.2 printer. Make use of the standard din rail mounts available in the Ender 3 NG project. It uses M3 screws, without brass insert, directly screwed into the plastic.
This is a mount for the M4P in the Switchwire. It's REALLY tight. You need 90º USB adapters to use the USB ports on the M4P, but this blocks the Ethernet port. Installation: I also added a mount for an 8010 fan to cool the steppers, this…
Mount made to put a BTT M4P into an Enderwire conversion.
Wanting to mount a Big Tree Tech Manta M4P on the Rook MK1, I coudn't see any other models, so made one
I primarily use filament from Prusament and Material4Print at home. The desiccant containers I’ve used so far usually didn’t fit well, making it impossible to store the spools in their original boxes. When I saw the model by kennyd1gital…
This Project was merged with my "Renkforce RF2000 Voron Conversion WIP" so please go there for updates.
My stock control board got zapped, had a Manta M4P lying around and did not want to pay $200 for a new board. I will upload printer config files and guide once I fully finish the conversion. Should be compatible with the X-Max3 and…
My stock control board got zapped, had a Manta M4P lying around and did not want to pay $200 for a new board. I will upload printer config files and guide once I fully finish the conversion. Should be compatible with the X-Max3 and…
A bracket to mount a BTT Manta M4P in a Rook. It fits into my modified/over-sized Rook frame with plenty of room to spare, but needs the printed standoffs to make a bit of extra room in a stock Rook.
This is a remix of the original case by teaching tech. Things I used Noctua 80mm fan 2x DCDC converters 10x M3x6 6x M3x8 1x M3x20 CSK socket cap screw 1x M3x20 socket cap screw 16x heat inserts M3 (3mm thick) print settings: layer height:…
Remix of Cave-Tech Manta M4P mount to be used on a 35mm din rail using the Din Rail Bracket by Fabian. Using M3 bolts to secure the DIN bracket to the Manta M4P mount. Attribution to: Manta M4P Mount Bracket for the Voron Switchwire by…
The BIGTREETECH Manta M4P is a simplified version of the original model based on the source code available on GitHub. This motherboard includes the main components but does not feature many SMT components.
This enclosure is for the Ender 3 S1 power supply and the BTT Manta M4P Motherboard. I printed this out of PLA with .2mm layer height and tree supports. You might be able to get away with no supports but I found there were some areas that…
I wanted to print the lid for the Manta M4P on my Ender 3, but it is too big. So I chopped it up into two pieces.
THIS THING IS A WORK IN PROGRESS - PICTURES AND IMPROVED INSTRUCTIONS TO COME LATER. About: I bought an Ender 5 years ago and have never been satisfied with it's performance - the print quality was fine, but it was wobbly, slow, and I was…
A stand made for the M4P case, can work with vertical or horizontal positions.
Ender 3 enclosure for BTT Manta M4P for use with CB1 and SPI35 Screen. Main case spilt into two parts for 250x250 beds. Single case piece fits on a 300x300 bed but warping can be trouble some which is also why I decided to split the case.…
