Ender 5 BTT SKR M4P Manta mainboard adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple bracket for mounting the M4P board inside the factory Ender 5 electronics case.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 59
- Makes
- 0
- Views
- 928
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
SKR Manta M4P mainboard
I made a video guide to using this mainboard and Pi substitute:
Please note that the M8P board is a similar concept, but has a different mounting pattern so is incompatible with this adaptor without modification.
Source CAD
Switch to the ‘SKR Manta adaptor’ tab. Even without an Onshape account, you can export parts in a format of your choice.
Printing
Only two parts required, neither need support and are already oriented correctly. I printed in PETG for thermal strength.
Installation
Remove PSU from standard case. Attach to adaptor using short M4 bolts. Original countersunk M4 bolts go through the factory case and into the adaptor. This moves the PSU 8mm sideways to create space.
Manta M4P board then attaches to the adaptor with M3 bolts.
Attach 3010 fan to fan bracket using 2 M3 bolts. One original mainboard mounting metal boss with be visible inside the case. Install the fan and bracket over this and secure it with a short M3 bolt.
Run the external WiFi antena cable out of the back of the case and stick it somewhere.
Note that the SD card port of the mainboard does not line up with the original opening in the case. This board is designed to be used wirelessly so I don't consider this to be an issue.
Safety considerations
- The PSU no longer attaches to the metal fame of the printer. I used a short length of mains gauge wire with crimped eyelets to connect the PSU ground terminal to a bolt going to the metal frame.
- Use as short as possible M4 bolts to attach the PSU to the adaptor. Using a long bolt that extends too far into the PSU and causes a short is a significant safety hazard.