V0.2 U2C PG7 Mount Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacing my V0.2's Picobilical UMB and Toolhead PCB with a BTT U2C and EBB36 + PG7 Strain Relief
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 1
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
I made the poles beefy and can handle a lot of mangling, Plus a PG7 Connector. I'll update if it doesn't fit the connector.
*I've printed the Tall/Non-Short One & It has a huge gap to run a cable vs. the Short might not
Make sure to Import geometry only & hit yes when asked to load as a single object for the short mount.
Original Remixed Desc: "2C mounts underneath and between the two A & B motors, right where the LDO Picobilical UMB was previously.
If your USB cable that connects to the U2C has a long head, you may need to use a 90-degree adaptor or cable."