V0.2 U2C PG7 Mount Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacing my V0.2's Picobilical UMB and Toolhead PCB with a BTT U2C and EBB36 + PG7 Strain Relief
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I made the poles beefy and can handle a lot of mangling, Plus a PG7 Connector. I'll update if it doesn't fit the connector.
*I've printed the Tall/Non-Short One & It has a huge gap to run a cable vs. the Short might not
Make sure to Import geometry only & hit yes when asked to load as a single object for the short mount.
Original Remixed Desc: "2C mounts underneath and between the two A & B motors, right where the LDO Picobilical UMB was previously.
If your USB cable that connects to the U2C has a long head, you may need to use a 90-degree adaptor or cable."