Raspberry Pi 3 Case for PiTFT 2.8 LCD and LiFePO4 UPS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for Raspberry Pi 2 or 3 with the Adafruit 2.8" PiTFT touchscreen lcd Adafruit PiTFT used:…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 1267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Enclosure for Raspberry Pi 2 or 3 with the Adafruit 2.8" PiTFT touchscreen lcd
Adafruit PiTFT used: https://www.adafruit.com/product/1601
This has the LiFePO4 UPS from here: https://lifepo4wered.com/lifepo4wered-pi+.html
With the two models I remixed a version that works for my Raspberry Pi 3 B+ and the older PiTFT I had hanging around. Due to the LCD overhang, a bit of remodeling was required of the remix.
I manually added the holes for the LCD after the print was complete, and I may model that in for the next revision.
You will need a bit of hardware to put it together.
- M3 x 40 cap head screws for the case.
- 4-40 x 1/2" screws for the LCD.
Print instructions
Category: Electronics Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 200um
Infill: 20%
Filament: Spool3D PLA