1 / 25
Skull Island Dice Tower
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was asked to print this for someone, but the model was really messed up. I fixed all the problems for easy printing.
- Ocena
- 4,5 / 5
- Polubienia
- 46
- Pobrania
- 202
- Wydruki
- 2
- Wyświetlenia
- 1155
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (67)Powiązane
A friend wanted me to print him a dice tower, and after he searched for a while he found this. But there were some problems, the model was very corrupted, and the bottom was uneven so you could not even print it. I fixed all those problem and also split it up so that it would fit on an MK4/S print bed.
Printing Settings:
Supports are needed, but you will want to block a lot of them so that it is easy to print.
| Resolution : | 0.2 | Support: | YES |
| Infill : | 15% | Brim: | YES |
| Material: | PLA | Filament Color : | ANY |
More designs
