Honda Inner Door Handle Screw Holder Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A press fit clip used as an anchor for a screw holding the inner door handle of my 2008 Honda Fit.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Measure and make sure you have the model that will fit as tight as it can into the hole on the metal of your Honda door.
As mentioned, I would use at least PETG or something tougher and more heat resistant.
They're tiny, so using 100% infill and instructions for CLEAR PETG printing, which you can search and find on Printables, and which I've used with success, you should get a small, completely solid part about as strong as an injection molded one would be.
I would call this Public Domain, but I am limited by the models to which I've linked.
