SureFeed Mircrochip Pet Feeder Back/Rear Cover - Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Back Cover/Rear Cover for a SureFeed Microchip Pet Feeder.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 302
- Wydruki
- 0
- Wyświetlenia
- 1384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my remix of @Alca's SureFeed Mircrochip Pet Feeder Back/Rear Cover, which can be found on MakerWorld. I've made a handful of improvements, which are listed below. This model simply covers the back and sides of a SureFeed Mircrochip Pet Feeder so that nosey pets can't get to each others food! This cover is typically offered for a whopping $38, so printing it is a great way to save money! It is recommended to print in PLA+ or PETG as having some flex is beneficial. If your print bed is under 235mm in one axis, cut the model in half, print each half separately, and then glue the halves together. I've also included .STEP and Fusion 360 CAD Files.
Changes from Original:
- Thickened walls by 1mm
- Swapped primary large fillets for chamfers to improve printability.
- Added chamfers on clips to reinforce
- Added thicker middle section to accommodate printing in two halves then glueing together on smaller printers.