Prusa MK3 - MK4S+ Mean Well 500W power supply upgrade bracket RSP-500-24
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket allows you to upgrade your 240W power supply to a Mean Well MEAN WELL RSP-500-24 500 W power supply.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this power supply bracket to install a 500W power supply in place of the original Prusa 240W unit when mine failed. Instead of replacing it with an original supply, I doubled the power to increase reliability and also reduce noise. It ran without a fan for 4 years, but was reinstalled after putting the machine in an enclosure.
Fits all MK3 and MK4 printers since they use the same frame.
I don't remember what bolts if any can be reused. The required hardware is listed bellow:
4pcs - M4 X 7mm (6-8 should work)
2pcs - M4 X 10mm
4pcs - M5 X 16mm
The lower bolt on the Z axis does not line up with any on the power supply, so it could either be drilled out and tapped, self taped with the bolt or simply left out.
I have included an affiliate link to the power supply on Amazon so you can help me create more models like this: https://amzn.to/425GXux