1 / 6
Prusa MK3 - MK4S+ Mean Well 500W power supply upgrade bracket RSP-500-24 — image 1
1 / 6

Prusa MK3 - MK4S+ Mean Well 500W power supply upgrade bracket RSP-500-24

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This bracket allows you to upgrade your 240W power supply to a Mean Well MEAN WELL RSP-500-24 500 W power supply.

Rating
0 / 5
Likes
3
Downloads
17
Makes
0
Views
260
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I made this power supply bracket to install a 500W power supply in place of the original Prusa 240W unit when mine failed.   Instead of replacing it with an original supply, I doubled the power to increase reliability and also reduce  noise.  It ran without a fan for 4 years, but was reinstalled after putting the machine in an enclosure.

Fits all MK3 and MK4 printers since they use the same frame.

I don't remember what bolts if any can be reused. The required hardware is listed bellow:

4pcs - M4 X 7mm (6-8 should work)
2pcs - M4 X 10mm
4pcs - M5 X 16mm 

The lower bolt on the Z axis does not line up with any on the power supply, so it could either be drilled out and tapped, self taped with the bolt or simply left out.

I have included an affiliate link to the power supply on Amazon so you can help me create more models like this:  https://amzn.to/425GXux

Tags