Counting matching models…
FT EMS version available here Move your PSU from bottom electronics bay to the back of the printer. Need panel and foam tape with 3mm thickness. The parts will squish the foam tape by 0.2mm. Hardware: Meanwell LRS-350 (LRS-200 also works…
Electrical safety warning: Messing with electrics is dangerous and carries risk of death. Please don't attempt to use this electrical box if you are not familiar with electric safety procedures and regulations in force in your country.…
Tested and works with S-150-12 model. Print in PETG.
This is a remix of a LRS-200 PSU cover that also fits the 350w version. I made the Voron logo pass through. This is an .3MF made with Orca slicer 2.2.0.
Low-profile mounting bracket for the MeanWell LRS-200-5 PSU. The mounting holes are rotationally symmetrical, so print two brackets per PSU. Optional extended model for embedding Wago connectors next to the terminals (print one of each…
So the Meanwell LRS-350 PSU's are notoriously loud. This mod fixes that by allowing the use of a Noctua fan installed instead. The model was based on Scott Yu-Jan's model where he installed one on an Ender 3 Pro. Unfortunately, that did…
This is a PSU mount for a MeanWell RS-150-1 for rook MK1.1, printed in PETG on default settings. I designed this mount with inspiration from: This mount allows the PSU to be slid into place then bolted to the Rook Mk1 and has cutout for…
Simple cover for connector so that loose pet hair or dust won't accumulate on the connectors. Made for meanwell LRS-350-24 but will probably fit on other psu's as well. It wont fit from top, you have to slide it in.
Abdeckung der Schraubanschlüsse für das Meanwell Netzteil LRS-150-12
For Mean Well LRS-350-24. It may be suitable for other LRS and RSP as well. PETG or ABS/ASA. Printed using perimeters only. It is installed very tightly, you may need a screwdriver to remove it back.
meanwell 350watt power supply case with heatinsert *the real life picture was the v1 version all mistakes were solved in easy Print version update: 24.08.2026 easy print version is out view changes: .added breakaway supports .blank wall…
I don't yet own a Prusa, but it's been brought to my attention that some Prusa printers in the wild are using the Meanwell LRS-350 24v PSU. If you own a Prusa machine that has a LRS-350 power supply, and would like to quiet its cooling…
A simple cover that provided the supply and a platform for my Accucell 6 battery charger to rest on. A slot for the wires lets you remove the cover if necessary. M3 30mm and 5mm screws with M3 heatsets lets you secure it to the power…
A low profile DIN clip to suit a MeanWell RSP-500 You'll want two of these.
Just a quick remix to reduce the total height of the enclosure to allow it to sit beneath the deck of the Mercury One.1 Note, you'll also need low profile DIN Clips, which I have here: Any 120x10mm fan should work, but I used this one:…
Could not find a standard don rail mount for the MeanWell PSU. Fusion file included Parts Needed 4 x M4 x 6 heat inserts 8 x M4 x 10mm Button Head Screws
Enclosure for a Meanwell PT-65B PSU board, IEC connector, and power switch for use as a replacement Amiga PSU. Uses 8x M3 4mm deep heat-set inserts to secure the board and the two halves of the enclosure, and 2x nylon M3 nuts+bolts for…
UPDATE 04142026: This model was requested by another Printables member for his Prusa MK3s Plus. He also suggested I include an unbranded version so those who either prefer not to provide free advertising for manufacturers or would want to…
Description The stock power supply for Qidi Q2 is 350W which barely powers the system. I personally replaced it with a 600W PS from MeanWell, Model No. LRS-600-24 . It's not mandatory, but a plus for better system operation. This model…
Used in my Home Lab video I needed something to mount a LRS-350-24 to a 10" server rack, so I made one Instructions Use M3x10 or M3x12 screws to mount the PSU to the mount Modeled in FreeCAD
Sovol SV06 ACE - Meanwell LRS 350 cover Another design of a Meanwell LRS 350 cover for SOVOL SV06 ACE. I tried matching the orginal design from Sovol, for better optics. You can use the orignal screws from the stock powersupply.…
BEEFY DIN RAIL MOUNTS These are Completely Overbuilt! They Require 1 purchased part - Link Below I made these mounts to solve the below issues from the Voron 2.4 r1. BOM STL files Will work on any 35mm Din Rail Mounted Setup These are…
I needed a mounting solution for a Meanwell ERPF 400 24 PSU, for my Ender 3. I chose DIN mounting for as cleaner setup but lacking a ready made plate or even screw holes on the PSU case, I drew one up from scratch. There are 2 versions -…
Print in Place plastic DIN rail mounts for meanwell (and other) power supplies with 50mm (center to center) hole spacing. Requires two for each power supply. Second one needs to be a mirror of the first (use your slicer to mirror the…
Improved the strength of the tab. In the comparison photos (with two parts side by side), the part on the left is this model while the one on the right is the original design I modified from. Printed in eSUN Fire Engine Red PETG with 0.2…
Voron style, simple DIN rail mount for meanwell PSU (other brands with 50mm threads space work's too) Printed from ASA but propably all filament types will be good
FT EMS version available here Move your PSU from bottom electronics bay to the back of the printer. Need panel and foam tape with 3mm thickness. The parts will squish the foam tape by 0.2mm. Hardware: Meanwell LRS-350 (LRS-200 also works…
Hardware needed to install Cap/Button Screw M4x6 - 8pcs (Screw on PSU) Cap/Button Screw M5x10 - 2pcs T Slot Nut 2020 M5 - 2pcs Factory power supply mount screws - 2pcs Print as oriented in the slicer picture. Print 2 brackets and one…
Mounts for Meanwell LRS 350 Power Supplies Single, Double, Triple Mounts Dual on-side Mount
Mounts for Meanwell LRS power supplies with mounting Kulp Lights boards to the top. Print two “single mounts” for the power supply and pick your top. Version in STL refers to the revision of your Kulp board.
Minimal PSU brackets, that allow you to mount a Meanwell LRS-30-24 power-supply completely under an Ender 3/Ender 3 Pro printer. Does not work with the stock Ender 3 power supply, but if you've upgraded to a Meanwell this will fit the…
My design for PSU Meanwell SP-320-24 mount on 3030 aluminum profiles. It is designed for my DIY printer and i don't know if it gonna fit on yours. So let me leave some blueprints with dimensions: 119 / 54 / 110 (W, D, H) with 2mm…
The Meanwell HRPG-300-12 has a different form factor than the original Prusa power supply. Here are STL files for my case and a parametric FreeCAD drawing that should easily adapt to different dimensions. The upper mounting hole in the…
Electrical safety warning: Messing with electrics is dangerous and carries risk of death. Please don't attempt to use this electrical box if you are not familiar with electric safety procedures and regulations in force in your country.…
Just cut off the side part as its should be strong enough. Also Tridents usually run inverted electronics ;) Voron part is shared under the original License, see their github. https://github.com/VoronDesign/Voron-Trident/blob/main/LICENSE
The stock Ender 3 power supply's failed several times on me, so i changed it to the Meanwell power supply from the Ender 3 Pro and took the chance to also relocate the switch to the back of the printer. As maybe seen in 'Thingiview' or in…
I was not happy with the way my components would be laid out on my Voron 2.4 build due to the size of the Leviathan controller board and the power supply. I searched for an adjustable DIN bracket to mount the components transversally…
Mount your LRS-50 small form-factor power supply on top of the larger LRS 350 and 600 power supplies. The larger supplies have slightly different screw terminal distances, so pick the one that works for your application. You will need 2…
A stand in which the Meanwell SP-150-12 is inserted and is attached to the side with an M4 countersunk screw. The cables can be fixed inside with a cable tie and then led out of the opening at the side.
have replaced the original power supply unit with an LRS-350-24 Meanwell power supply unit. It is a bit too big, but a smaller one with 10 A was not available. The power supply unit holders are screwed to the 20x20 profiles. No changes to…
This is a minimalist design for mounting and protecting the terminals of a Meanwell LRS-100 series power supply. It relies on a C14 socket for input voltage, and provides holes in the front of the cover for output wiring (grommets…
housing to turn a meanwell LRS 350 slim power supply into bench power supply Power supply: https://www.digikey.ca/en/products/detail/mean-well-usa-inc/LRS-350-12/7705030?s=N4IgTCBcDaIDYCcDOBaAzAVgAwoIwQF0BfIA Power cable:…
i was dissatisfied with the other mods due to a lack of sturdiness so i designed my own. uses some heat inserts and left over t-nuts from the kit that slide into the bottom of the 3060 profile, in conjunction with a press fit into the…
The RPS-320-24 is delivering a lot of power, but the original fan was just too noisy. So I choose a Low noise fan NF 6*25. But due to his width of 25mm, it must be installed outside of the original frame, so I designed a new cover to…
Meanwell LRS-350 PSU holder. Print Height: .3mm Infill: 20% Material: PETG
Tested and works with S-150-12 model. Print in PETG.
Halter für ein Meanwell RS-50-5 Netzteil mit Platz für einen ESP ideal für WLED Holder for a Meanwell RS-50-5 power supply with space for an ESP ideal for WLED
Support: maybe Layer-height: 0.2 Infill: 15% Material: PLA
Mount the bottom bracket first. Pull the wires through the provided window and connect to the power supply. If mounting vertically with the wires going below, only bottom bracket seems to be holding well. If you need additional…
I wanted a good easily printable in one go mount for attaching the Dig-Octa system (power+brain) to a MeanWell Power Supply and have that whole lot mounted to the wall/shelf. It also needed to have the Wifi Antenna mounted on it just…
I updated my old broken A500 power supply with a Meanwell RPT-60B and didn't want to drill any visible holes in the case. So I designed this bracket. for this only a hole has to be drilled in the interior, which is not visible from the…
About Meanwell LRS-350-24 PSU Case This is DIN rail mountable (and standalone) case with protection cover for Meanwell LRS-350-24 PSU. This case is designed primarily as an accessory for The RIG — a DIY workstation stand for testing…
Two of these can be fixed to a Leviton Media Center. Stick a 4 bolts into the back of your power supply, then hang it on slots in these brackets.
I use Octoprint ( OctoPrint.org ) in combination with OctoRelay ( OctoRelay ) to control the lighting and heating/fan of my 3D printer housing from TUKKARI. Over time, the 4-channel LM2596 DC board with 3.3V, 5V, and 12V (part of my…
This will not work with the ender3 pro style terminal covers, and possibly others that cover the first set of side screws near the terminals. I use this terminal cover . It may or may not slide on all the way. I don't recall, but it…
Meanwell LRS-350 + SonOff standalone case. Parts list Meanwell LRS-350 series PSU SonOff Basic Glass Fuse holder (for 5.2mmx20mm or 5x20mm fuse) Glass fuse (5x20mm) Rubble feet PG9 Cable Gland Strain Relief Optional Custom firmware for…
I designed a compact honeycomb mount for the MeanWell RS-15-5 power supply, featuring ventilation holes on two sides for improved airflow. The PSU is securely attached using two M3x8 screws, which fasten through the mount into the…
I had a Macintosh LC II with missing power supply, so I bought a compatible Meanwell RPT-60A and designed an adapter with mounting holes, the IEC plug and power switch. Note that this plastic print isolates the PSU, so you should ground…
A very small Meanwell LRS 350 bracket / foot made for a project. Print 4x and secure with short M4 screws. Should fit all LRS and similar models.
I didn't have the original Delta PSU components to use and I try not to open power supplies, so a replacemnt 5USD AdamTech inlet is a economical choice. Note that the original model is marked Mk3, but I'm pretty sure it is derived from…
Quick and dirty remix of Voron Design's Meanwell RS-25 DIN mount for use with a Meanwell RS-15. This was my first attempt to remix any model after just watching the Tinkercad tutorials so please forgive the novice attempt. The final mount…
Es geht um ein Gehäuse für folgendes Netzteil: https://amzn.to/3Q7t0pd Ich habe mich beim Amazon Partnernet registriert, verdiene daher als Amazon-Partner an qualifizierten Verkäufen und bedanke mich daher, wenn ihr die Links nutzt. Ich…
An external mounting option was required for the Meanwell UHP-350-24V power supply. The original model was adapted and significantly modified for this purpose. Important information: - model can be printed in PLA or PETG - screws and nuts…
Simple shroud for a meanwell lrs350 power supply, 100mm tall, 68mm extends below the power supply, 4.75mm (based on 5mm, additional tolerance brings it to 4.75) wall thickness (except for the flush side) Notes: Uses existing hardware from…
Created the piece so I can mount my Meanwell PSU （LRS-200-12）vertically on the side of my Kossel， sizing base on the provided data sheet, holes are slightly bigger for easier fitting. Sketchup files are provided. Category: 3D Printer…
Hardware: 7x M3x6mm 4x Heat inserts M3x3mm 1x Rubber grommet 11mm I printed it standing on its face, using clear PETG. I was trying out my 0.6mm nozzle and used the largest layer height preset, which was 0.42mm. Printing it in that…
11.03.2022 - Updated positions of bores for both endcaps/ turned powerswitch (V2) This brackets fits to Meanwell UHP-350-24V power supply in combination with Ratrig V-Minion 3D Printer.
This is a remix of a LRS-200 PSU cover that also fits the 350w version. I made the Voron logo pass through. This is an .3MF made with Orca slicer 2.2.0.
I've replaced the stock CLS49-350-24 power supply from my Creality K1C because it was very loud. The swap with MeanWell LRS-350-24 is very simple because the Creality power supply it's a clone of LRS-350. After replacing with LRS-350-24,…
PSU Cover for Meanwell RS-75-24 Currently using as a second supply for a custom printer build. Fits supply exactly. Printed in PETG with 20% infill / 3 perimeters / 5Top/5Bottom Layers. Category: 3D Printer Parts
As the name describes, a case for a MW SP320-24 power supply . (Should fit the entire SP320 series since they are of the same form factor. Cutout for KM 01.1205 :: Combined, plug, fuse, power switch 1-pole and cables to the three + and -…
I bought an HRP-600-24V Meanwell power supply for my Hypercube Evolution build. Included: a cover for the AC side a mounting bracket a lid to go over the DC side (just protection against dropped stuff) a cable tie anchor strip for the DC…
Found that the Remix from @ReneDifferenz_299585 are a little bit to low for M3x6 screws and the head of the shcs arent deep enough into the Holder. So i remixed it.
Case for the well-known Meanwell LRS-50-5 PSU : https://www.meanwell.com/webapp/product/search.aspx?prod=LRS-50 Design specificities : - Case Front panel : IEC320 C14 inlet power socket with fuse and switch - Case Rear panel :…
I’m not a pro at 3D printing; I just made a box for the Ugreen 300W and Meanwell 120W power supply. It should be compact in size for me and enough for daily use. (You should use the same glue to stick the Ugreen board to the top face.)…
Cover for Meanwell Powersupply it keeps little (and big) fingers away from shocking experiences safe and allows you to hang the PSU on a board. Print instructions Category: Electronics Print Settings Printer: Mendel90 Rafts: No Supports:…
Another version for Ugreen 300W super compact size. I just made a box for the Ugreen 300W and Meanwell 120W power supply. It should be compact in size for me and enough for daily use. (You should use the same glue to stick the Ugreen…
you need to tap the base aluminum enclosure I just found this on AliExpress: US $9.12 | Aluminum Enclosure 125*51*110/150/160/180mm Split Case Electronic Project PCB Instrument Black DIY Power Supply https://a.aliexpress.com/_okLE5EL…
Just a simple remix for easier printing and proper fitment on my FFCP and/or Dup4 printers. May fit other Makerbot clones Category: 3D Printer Parts
I recently had to modify an old design of mine that I never published. It might be useful for other people. It has an opening for a euro c14 connector/switch combination and a cheap V/A meter. There is a mounting point inside for the…
The original PSU holder isn't compatible with the slimmer meanwell ones supplied by ender3 pro and v2. Remixed the part so that it would work with the meanwell ones. Printable without supports!
Few adjustments to already existing PSU relocation model. Requires 2 m3 inserts.
This CAD model is not intended to be printed, it is meant to aid in designing models around this PSU series. While just the bolt pattern may be enough sometimes, having the exact size helps when fitting a case and checking for…
Since these models could be used with electrical components, if you use these models, it is at your own risk. Using a fire resistant filament is probably a good idea too. This is a remix with a clip design that originated from Ramalama2…
For providing A/C input cover and D/C output cover for a Meanwell SE-600-24 (or other SE-600 series) power supply. Designed to use the following IEC320 power entry: https://www.mouser.com/ProductDetail/161-PX0575-15-63 And the following…
I needed a new power supply for my laser engraver and could not find one ready to go. However a Meanwell 24v 6.5A LRS150 was a perfect fit. Could not find a full enclosure however and as I have kids around wanted it to be a little more…
This is my MeanWell PSU RSP-500-24 cover and mount for Tatara A8. You can use the cover for every printer with this PSU. It has some holes (in Tatara style) for better cooling and also some space to hide a cables in cover. I used power…
Uses two of the original m3 flat head screws, and three of your shortest m3 flathead screws and some m3 nuts.
This is a simple case for using the power supply on the bench top, but the original was too simple. By making the sides and bottom a little thicker I could add chamfers to make it not so sharp, counterbore the screws on the bottom, and…
I need it as reference for a project I'm working on and could not find the model on the web.
This bracket is used to mount a power supply to a printer base. My power supply is a MeanWell brand but I believe that the mounting holes are the same on these style of power supplies. Four of these brackets provide an easy way to mount…
I needed a cover for the terminal side of a Mean Well LRS-350-24 PSU with enough space to house a plug socket with rocker and took the chance to dust off my limited CAD skills. It's also my first public design. I hope it can be of use to…
Remixed the LRS-200-24 Cover to fit the smaller 150W Series from Meanwell. Gets secured by an M3x6 screw on the right side of the unit. Hole fitment is a bit tighter than i intended (a bit too low), but works well enough. Confirmed fit…
Thank you to Rolohaun and Kanrog for all the work both have put into this design. I tossed up wether to upload this or not but figured it maybe helpful to someone. Its just a small adapation to the stock meanwell mounts for the Rook 2020…
This remix addresses some fit issues with the original model (see list of changes for details). Print as oriented; you shouldn't need supports. I advise attaching the bottom portion first, then the top. The clearance added is only 5mm, so…
![[WLED] Meanwell Netzteil halter mit ESP / Meanwell Powersuply wallmount with space for an ESP](https://media.printables.com/media/prints/111343/images/1096842_455c95d2-c3c2-4014-8ea5-8287614b5ccb/screenshot-2022-01-03-081033.png)
