V2 Meanwell LRS-350-24 PSU Bracket Stand Ender 3 (Dual Z Compatible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original had everything I need except a hole for the power connector to pass through the rear so I added some
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 136
- Makes
- 1
- Views
- 941
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Print in given orientation. Supports needed for the main ‘hole’, I printed using Tree support. Place blockers on the top of other holes, supports not needed there. 3 holes added to the rear for freedom to pass through the 24V power cable.
4 sets of spare T-slot nuts and bolts needed. Other hardware can be reused from stock Ender 3 PSU.
Install sequence;
Screw the mains socket into bracket without connecting the PSU. bolt down the empty bracket. Snake the 24V cable through one of the rear pass through. Lay the PSU on the build plate. Connect the mains cables. Slot the PSU into the bracket while cable managing. Bolt the PSU to the bracket