1 / 2
V2 Meanwell LRS-350-24 PSU Bracket Stand Ender 3 (Dual Z Compatible) — zdjęcie 1
1 / 2

V2 Meanwell LRS-350-24 PSU Bracket Stand Ender 3 (Dual Z Compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original had everything I need except a hole for the power connector to pass through the rear so I added some

Ocena
5 / 5
Polubienia
21
Pobrania
136
Wydruki
1
Wyświetlenia
941
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Print in given orientation. Supports needed for the main ‘hole’, I printed using Tree support. Place blockers on the top of other holes, supports not needed there. 3 holes added to the rear for freedom to pass through the 24V power cable.

4 sets of spare T-slot nuts and bolts needed. Other hardware can be reused from stock Ender 3 PSU. 

Install sequence;

Screw the mains socket into bracket without connecting the PSU. bolt down the empty bracket. Snake the 24V cable through one of the rear pass through. Lay the PSU on the build plate. Connect the mains cables. Slot the PSU into the bracket while cable managing. Bolt the PSU to the bracket