1 / 6
Meanwell LRS-100-5 + ESP8266 Enclosure for WLED Neopixel Strips — image 1
1 / 6

Meanwell LRS-100-5 + ESP8266 Enclosure for WLED Neopixel Strips

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is an enclosure designed to fit closely to a Meanwell LRS-100-5 power supply, and to house a NodeMCU Base PCB.

Rating
5 / 5
Likes
59
Downloads
252
Makes
1
Views
3,537
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

This is an enclosure designed to fit closely to a Meanwell LRS-100-5 power supply, and to house a NodeMCU Base PCB.

My objective was to have a neat, all-in-one enclosure for all I need to run the excellent WLED "Neopixel" addressable LED controller:
https://github.com/Aircoookie/WLED

The enclosure uses four M3 heat set threaded inserts to retain the lid, and a fifth is used to couple to the PSU. The type of inserts I used are shown in one of the images.

The enclosure has an aperture for a IR receiever, which WLED can make use of for IR remotes.

I have included "bunny ear" corner brims - add these on the slicer build plate aligned to the box/lid for low effort low material brims - they work great. The 3MF files should have these brims already pre-aligned.

I have remixed using the wire strain relief from this thing on Thingiverse: https://www.thingiverse.com/thing:4498756 - thanks to the OP.

The model (STEP) of the LRS-100-5 is available from the meanwell site: https://www.meanwell.com/productPdf.aspx?i=411

3D models are provided as:

  • STLs for all parts and brims
  • 3MF for parts + brims aligned on build plate

Print instructions

I printed with PLA @ 60mm/sec
0.28mm layer height
No supports
Used the bunny ear brims

Tags