Slim Meanwell LRS-350 PSU Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slim LRS-350 PSU cover for your Ender-3
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 307
- Makes
- 1
- Views
- 2,562
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The stock PSU on my Creality Ender-3 needed to be replaced, so I swapped in a Meanwell LRS-350-24. I couldn't find a cover that quite fit the Ender-3's arrangement, so I created this.
You will likely have to bend the terminals/wires for the plug a little bit due to how thin the enclosure is. I also left the holes for the socket small for the stock screws, so if you plan to use M3 screws, you'll have to drill the holes out a little bit.
This will work on other printers/configurations if you plan to mount the PSU in a similar fashion.
Note: Use an IEC320 C14 socket if you're not transferring parts from an Ender-3.