25mm Corrugated Tube Cap – Radiator Rosette Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap for 25mm corrugated tubes, inspired by radiator trim rosettes. Includes two versions: one with a 7mm hole, and one c
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This model was created to neatly and securely close the end of a 25mm corrugated tube left exposed after home renovation work. The tube, intended for electrical wiring, ended flush with the wall, leaving visible cables without a proper finishing element.
The design is a remix of two models found on Printables: a radiator-style rosette used for the visible front, and a press-fit cap with flexible fins for a snug fit inside the tube. Once inserted, the part should be slightly twisted to lock it firmly into place.
Two versions are included:
- One with a ~7mm center hole, ideal for passing through cables;
- One with a completely closed bottom, which can be drilled as needed using a standard metal or wood drill bit.
Printed in PLA, with 4 perimeters and no supports required, the result is a clean, sturdy, and functional solution for finishing exposed tubing in walls or ceilings.
