1 / 1
25mm Corrugated Tube Cap – Radiator Rosette Style — image 1

25mm Corrugated Tube Cap – Radiator Rosette Style

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cap for 25mm corrugated tubes, inspired by radiator trim rosettes. Includes two versions: one with a 7mm hole, and one c

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
60
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial

This model was created to neatly and securely close the end of a 25mm corrugated tube left exposed after home renovation work. The tube, intended for electrical wiring, ended flush with the wall, leaving visible cables without a proper finishing element.

The design is a remix of two models found on Printables: a radiator-style rosette used for the visible front, and a press-fit cap with flexible fins for a snug fit inside the tube. Once inserted, the part should be slightly twisted to lock it firmly into place.

Two versions are included:

  • One with a ~7mm center hole, ideal for passing through cables;
  • One with a completely closed bottom, which can be drilled as needed using a standard metal or wood drill bit.

Printed in PLA, with 4 perimeters and no supports required, the result is a clean, sturdy, and functional solution for finishing exposed tubing in walls or ceilings.

Tags