1 / 3
Holder for an Omtänksam Shoehorn on a Tjusig shoerack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Holder for an Omtänksam Shoehorn on a Tjusig shoerack so you can place your shoehorn next to where its needed
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
i would recommend using Petg for the Print cause you will need the flexibility for the snap.
0.2 mm Layers with 3 walls
Also you should print it upright so the layeradhesion is not important for the snapmechanism