P
Printablesdodasch
Shoehorn
print in 0.2mm layer height, with PETG, maximal perimeters, align your seam and some brim around it 11.08.2023 UPDATE: added V2 / smoother geometry
- Pobrania
- 2020
- Polubienia
- 123
- Ocena
- 4,63
Wyniki wyszukiwania: shoehorn
100 modeli
P
PrintablesGrexxen
Shoehorn Holder (Ikea)
I've designed this holder for ikea shoehorns because they are always out of place or hanging on the edge of a sideboard so they fall off as soon as you get close. Now our shoehorn always hangs securely and in the right place. I printed…
- Pobrania
- 1261
- Polubienia
- 175
- Ocena
- 5
P
PrintablesINVESTEGATE
Shoehorn Shoe Horn Schuhlöffel Shoespoon - Deformable in Oven
Hello Makers, i designed an easy to print shoehorn, which can be heated and shaped in the oven. LEAVE A LIKE IF YOU LIKE IT <3 Print settings: no support no brim 3 perimeters 25% triangle infill about 1,5mm thick solid layers for Bottom…
- Pobrania
- 809
- Polubienia
- 38
- Ocena
- 5
P
Printablesmoxx1985
Mini Schuhloeffel / shoehorn
Mini Schuhlöffel für unterwegs oder die Schublade. Gedruckt in PLA mit 25% Infill. Am Besten Schuhlöffel mit einem Band versehen. Den Schuhlöffel zuerst in den Schuh stellen, dann einsteigen und mit dem Band rausziehen.…
- Pobrania
- 617
- Polubienia
- 34
- Ocena
- 4,8
P
PrintablesPetr Závorka
SHOEHORN HOLDER - IKEA
stick on the wall with glue
- Pobrania
- 484
- Polubienia
- 30
- Ocena
- 5
P
PrintablesRadoslav S
shoehorn holder
Easy to print with any material, 15% infill is enough. Supports not needed. - screw mount version added
- Pobrania
- 388
- Polubienia
- 27
- Ocena
- 5
P
PrintablesStarec194
Shoehorn travel version
Simple small shoe horn. Model size: 97 x 36 x 13 mm Added areas on the sides for easier printing. Printed with supports & brim Optimized for a 0.4 mm nozzle Layer height: 0.16 mm Material: PETG 2 wall loops Only 2 meters of filament, less…
- Pobrania
- 362
- Polubienia
- 75
- Ocena
- 0
P
PrintablesFidreus
Wall holder for IKEA OMTÄNKSAM shoehorn
Three versions, one that makes is touch the wall and two deeper one that makes the shoehorn hang 5mm or 10mm further out from the wall.
- Pobrania
- 313
- Polubienia
- 29
- Ocena
- 4,67
P
Printablesrtm
Shoehorn with a salmon tail
It's a salmon season here in the Pacific Northwest. It's always a good idea to have a shoehorn with you on the river, where you'll be changing your boots at least couple of times. I've designed and printed this shoehorn to keep it in my…
- Pobrania
- 266
- Polubienia
- 26
- Ocena
- 5
P
PrintablesCrustySweetRoll
Shoehorn
A strong shoe horn designed to aid with changing footwear on prosthetic legs/feet and other stubborn footwear. I would advise 4 perimeters if using a 0.4 nozzle and 23% cubic infill for strength. A 2-3mm brim is also a good idea.
- Pobrania
- 263
- Polubienia
- 22
- Ocena
- 4,75
P
PrintablesGokburt
Low poly mini shoehorn - shoe horn
Start your day with something unique! I made a low poly version of a mini shoehorn, that I think looks cool. It works surprisingly well, and it's as easy to use as the original :) I printed it in PLA. Slicer settings : 0.20mm layer height…
- Pobrania
- 255
- Polubienia
- 56
- Ocena
- 5
P
PrintablesOvland3D
Shoehorn holder
20% fill PETG clear M3 double-sided tape on the back
- Pobrania
- 223
- Polubienia
- 8
- Ocena
- 5
P
Printablesfabianholzer
Hex Shoehorn
The small shoehorn has a minimal honeycomb pattern typical of 3D printing. For durability, the shoehorn should be printed with PETG. The following print settings should be activated: Avoid crossing perimeters (Layers and perimeters)
- Pobrania
- 207
- Polubienia
- 19
- Ocena
- 4,5
P
Printablesjam
Shoehorn
Shoehorn to take with you with hole to attach on hook etc
- Pobrania
- 200
- Polubienia
- 15
- Ocena
- 5
P
PrintablesCosmic_Cupcake
Shoehorn Plant
Transform one of the most mundane items in your household into something special! This little plant lookalike holds 6 shoehorns in various sizes, both for adults and children. The pot can be filled with decorative materials for…
- Pobrania
- 175
- Polubienia
- 103
- Ocena
- 5
P
PrintablesDennis
- Pobrania
- 162
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMotolsky
Lžíce na boty - Shoehorn
Easy and fast print, 0.3 layer. Its save shoe, nerves and time when you leave a home 😀✌
- Pobrania
- 133
- Polubienia
- 7
- Ocena
- 4,67
P
PrintablesAndriu33
simply but useful shoehorn
I introduced you a very simple 3D printed shoehorn :) Easy to print (picture shown the face to set as base) Recomended to print in PETG with skirt of 8 mm (GCode included) Hole in the end to get it hooked in the wall
- Pobrania
- 128
- Polubienia
- 12
- Ocena
- 5
P
PrintablesJirka B
Shoehorn half-moon hanger
Simple shoehorn hanger. Two variants - one with hole for screw and second one without it. Recommended print settings Resolution: 0.15 Supports: No
- Pobrania
- 123
- Polubienia
- 11
- Ocena
- 0
P
PrintablesLayerForge
Fantasy Shoehorns - Wolf, Eagle, Dragon
Designed as a functional shoe aid, this model combines practicality with detailed fantasy-inspired artwork. The long ergonomic shape helps guide your heel into the shoe while reducing strain when putting footwear on. In the download…
- Pobrania
- 117
- Polubienia
- 33
- Ocena
- 5
P
PrintablesGremei
SHOEHORN IKEA OMSORG Holder; shoespoon, Schuhlöffel No support needed
Easy to print with no support as shown at the images. This shoehorn holder is easy to srew behind and hidden to a sidewall of a furniture. You also can glue it with doublesided tape directly to the sidewall of a furniture. I suggest to…
- Pobrania
- 111
- Polubienia
- 13
- Ocena
- 5
P
Printablestyatarou
Shoehorn
Please print with filament that has high interlaminar strength and toughness. I used eSUN's ePLA-ST. I recommend a 0.15mm layer. You can print without the support, but it will print better if you use it. 積層間強度と靱性が高いフィラメントにてプリントしてください。…
- Pobrania
- 109
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDbarcik
Shoehorn IKEA x1
Holder designated for Shoehorn OMTÄNKSAM (IKEA).
- Pobrania
- 105
- Polubienia
- 8
- Ocena
- 5
P
Printablesdm
Adjustable long handle Shoehorn with middle and end pieces
This is a remix of the model created by Wychall with some modifications. I printed this for an elderly person in need of a long shoehorn. The handle pieces were printed twice along with the shoehorn and handle end to make it a long 4 part…
- Pobrania
- 105
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRott3D
Child shoehorns
Practical helper for your childrens, with favorite heroes.
- Pobrania
- 99
- Polubienia
- 22
- Ocena
- 0
P
Printablesmartin
Ikea OMTÄNKSAM shoehorn holder
Wall mount holder for IKEA OMTÄNKSAM shoehorn spoon and many other similar shoehorns Easy mount using only one screw Screw 4,5x55 (or 4x50) for best fit v2 - screw cap added for better look
- Pobrania
- 90
- Polubienia
- 12
- Ocena
- 0
P
Printablesstone
Ikea Omtänksam shoehorn wall hanger
Ikea's metallic shoehorn was always falling down or hidden in the closet, so I made a little and simple wall mount for it that prints quickly and is mounted to the wall with just one skrew. Can be customized by adding text in prusa slicer…
- Pobrania
- 89
- Polubienia
- 7
- Ocena
- 5
P
PrintablesMikolaj Kolendowicz
small shoehorn hook/ mały hak haczyk
Mały hak do łyżki do butów, po powiększeniu w sliccer może służyć do wieszania innych, większych elementów, u mnie mały hak jest do łyżki do butów a powiększony do ubrań dla dziecka. Nie potrzeba podpór A small hook for a shoe horn, after…
- Pobrania
- 84
- Polubienia
- 3
- Ocena
- 5
P
PrintablesMorten Haglund
Shoehorn holder for omtänksam
This is a holder for the Ikea omtänksam shoehorn, its with and without screw mounting The screw is a normal wood-screw with 8mm head. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: .3 Infill: 10% Filament: Clash…
- Pobrania
- 82
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLaen
Shoehorn
Just a simple shoehorn that prints in 30 minutes. It prints on its side, for maximum strength. Set perimeters to 3.
- Pobrania
- 74
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSTxS
Schuhlöffel lang und verstärkt / Shoehorn long and reinforced
Material: 42 g ASA (PLA+?) Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein…
- Pobrania
- 69
- Polubienia
- 7
- Ocena
- 4,67
P
PrintablesMatthew
IKEA shoehorn wall mount
Wall mount for an IKEA OMTÄNKSAM shoehorn. Sized to fit 3M Command Strip velcro strips on a wall. Prints well rotated with the biggest wall vertical and the biggest side of the dome facing up. I used PLA, 20% infill and four walls with…
- Pobrania
- 69
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDrevokocur
Double shoehorn hanger
Hanger for one small and one big shoehorn PLA compatible
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTom Petr
Wolf Shoehorn
Wolf Shoehorn A unique 3D printable shoehorn featuring a detailed wolf head, paw prints, and forest-inspired engravings. Designed for everyday use while adding a striking decorative touch to your entryway, office, or cabin. Easy to print,…
- Pobrania
- 52
- Polubienia
- 20
- Ocena
- 0
P
PrintablesChristopher Löwenstein
Holder for ikea shoehorn OMTÄNKSAM
printed at 20% infill PLA supports required fits M4 Screws
- Pobrania
- 51
- Polubienia
- 8
- Ocena
- 5
P
PrintablesFalco
IKEA Shoehorn holder.
Filament : GST 3D. Pla+ Support : None. G code. with All top-Ironing.
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKIRBI
shoehorn portable, mini, 10 centimeters
I made this model on Fusion 360, it works good for your house. You will have to print this shoehorn with petg, with pla you could risk to brake it. You will have to use supports to print this, print it with the longest part facing the…
- Pobrania
- 47
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLowinenPien
Shoehorn hook
a hook or holder for any kind of stuff, specially designed to hang a shoehorn. Fits all shoehorns up to 3cm in width. Can be hanged everywhere with adhesive on the backside.
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 0
P
PrintablesM. Vávra
Háček na lžíci na boty (Shoehorn hook)
Můj první vlastní model. Potřeboval jsem háček na lžíci na boty místo hřebíčku. Oproti obvyklým háčkům je plochý a zahnutá lžíce na něm lépe drží. Na spodní straně má 0,5mm drážku pro 19mm šírokou oboustrannou lepící pásku. Nakonec jsem…
- Pobrania
- 43
- Polubienia
- 4
- Ocena
- 5
P
Printablesitsdejvid
Shoehorn Holder (držák obouváků)
I have designed this holder because we were putting them on top of the shoe cabinet, so every time you opened it from top, the shoehorns kept falling. It does not look gorgeous, but it does the job. It is designed for any shoehorn with at…
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPrint By Bear
Shoehorn
I have a grandma who likes to travel a lot and has trouble getting her shoes on. If you combine those 2 things you get the new compact shoe horn I designed. Fits in a keychain or just a pocket and is easy to use
- Pobrania
- 41
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMykashy
Shoehorn Holder | Držák na nazouvačku
Český popis Tento držák na nazouvací lžíci je praktickým doplňkem pro předsíň nebo botník. Udrží vaši nazouvací lžíci vždy na svém místě, takže ji už nikdy nebudete muset hledat. Model je navržený pro snadný 3D tisk bez podpěr. Lze jej…
- Pobrania
- 38
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFokieH
Schuhlöffel Halter / shoehorn holder
Ein simples Modell zum Aufkleben auf einen Schrank um den Schuhlöffel daran einzuhängen. Ich hatte zuvor immer das Problem das der Schuhlöffel sobald man Ihn unbeabsichtigt berührte direkt runterfiel. Nun hält er an Ort und Stelle.…
- Pobrania
- 37
- Polubienia
- 5
- Ocena
- 0
P
Printablesbwaslo
A shoehorn -- the kind with teeth
Shoehorn with teeth. https://www.youtube.com/watch?v=YBBu5FLGquE I needed a shoehorn, so I thought “why not print one?”. And I found PhD3DP's model for one that had good reviews and downloaded that. But the damned song started going…
- Pobrania
- 33
- Polubienia
- 8
- Ocena
- 0
P
PrintablesVyviora
shoehorn wall holder
We have a metal shoehorn... so a little bit heavy... but my holder (on the cabinet) working well few weeks ago... I made two version... so you can download it with and without hole... if you wanna use double side tape. :) You can try it…
- Pobrania
- 32
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFlashL
Shoehorn OMTÄNKSAM mount
Wallmount for the best shoehorn from IKEA.
- Pobrania
- 31
- Polubienia
- 5
- Ocena
- 0
P
PrintablesHelyon
ShoeHorn Hang
This hook can be mounted using 3M VHB Tape or another double-sided tape. I've used it with the Ikea aluminium shoehorn, and it has stayed in place for over a year now.
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKamil Tyrpiał
IKEA metal shoehorn holder
Simple holder for IKEA metal shoehorn. It may hold other shoehorn, yet I'm not sure about fitting. Its designed to hold shoehorn in such position, so it doesn't hit furniture nor fall on the ground by itself. Printed on Ender 5 PRO with…
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSTxS
Schuhlöffel breit und verstärkt / Shoehorn wide and reinforced
Material: 35 g ASA (PLA+?) Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Siehe auch / see also:…
- Pobrania
- 29
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCMannucci
Long shoehorn
A robust long shoehorn for a daily use. Best printing with PETG (more robust and flexible). Objects must be printed lying down to increase sturdiness and post-printing is recommended (sanding and coating with vinyl glue of the back side).…
- Pobrania
- 29
- Polubienia
- 0
- Ocena
- 0
P
PrintablesIgloro
Shoehorn OMTÄNKSAM holder IKEA
Holder for ikea OMTÄNKSAM shoehorn with space for magnets . Can be used without magnets.
- Pobrania
- 28
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJay
OMTÄNKSAM - Shoehornholder
I designed this shoehorn stand because our shoehorn never seemed to have a dedicated place and was always ending up somewhere different. I wanted a simple solution that would keep it easily accessible right next to the front door. While…
- Pobrania
- 28
- Polubienia
- 12
- Ocena
- 0
P
Printablesjanaunderground
Shoehorn Holder
This is a shoehorn holder for the Ikea shoe rack (TJUSIG). We use it with the Ikea shoehorn (OMTÄNKSAM).
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 5
P
PrintablesStefan
IKEA SNÖSKYFFEL Smiley Wallmount shoehorn - Multicolor
Print with 0,2mm Layer height Change Color start with yellow 0,8mm black 2,00mm red The colorchanging in Prusa illogical for me, so if that's the case for you then I recommend you to use the 3mf file! ;-) everything is set… Mounting with…
- Pobrania
- 28
- Polubienia
- 0
- Ocena
- 0
P
Printablessteamcatcher
Truss ShoeHorn
All the shoehorns I saw seemed boring and not tough enough. So after some sims and basic understanding of how physic works this beast was created. Some singularities while doing the FEA was not to avoid because of vertices that were fixed…
- Pobrania
- 26
- Polubienia
- 14
- Ocena
- 0
P
Printablescpc756
Shoehorn remixed a little longer 16.5cm.
I printed with one edge on the plate and a brim around it. layers parallel to that edge and not straight down the shoehorn. I thought it might be a problem and was considering printing on a raft, but I no longer think that is necessary.
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 5
P
PrintablesVladimir Zavediaev
Ikea shoehorn holder (OMTÄNKSAM on double TJUSIG)
A shoehorn holder for owners of OMTÄNKSAM shoehorn and TWO (2) TJUSIG shoe racks (one on top of another). Print requires supports.
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
PrintablesScorpionSting
Ikea Shoehorn Holder
Shoehorn holder for an Ikea long shoehorn. This fits on top of a 14mm door width.
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPrinting Panda
Shoehorn Wall Holder – Simple Design in OpenSCAD
I made this small wall holder to keep my shoehorn in one place and easy to reach in the hallway. It’s sturdy, practical, and does the job well. Fits shoehorns up to 28 mm wide at the top. Size: Width: 36 mm Depth: 33 mm Screw holes: 3 mm…
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJan06
Shoehorn
Wall-mounted shoehorn designed for the IKEA OMTÄNKSAM series. It allows you to put on shoes comfortably without bending down and is always within easy reach thanks to its fixed position. Installation is done using strong mounting tape…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMezaME
Holder for an Omtänksam Shoehorn on a Tjusig shoerack
i would recommend using Petg for the Print cause you will need the flexibility for the snap. 0.2 mm Layers with 3 walls Also you should print it upright so the layeradhesion is not important for the snapmechanism
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
Printables_tbf
Shoehorn hanger for Norrgavel Bagshelf
It is solving a very specific problem that my family and I have. But if you have this https://norrgavel.no/mobler/oppbevaring/posehyller/posehylle-med-4-poser-bjork and this…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesViM
Shoehorn magnetic holder
Just add 4 3*6mm magnets and glue it where you want (silicon caulk or double sided tape works great)
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
Printablessteffanders
Shoehorn wall bracket
We got a new shoehorn which was too to big and too beautiful for the drawer. It is a famous i.e. amazon article which you can get in different length and from different sellers. It must be fixed like a sculpture and easily accessible for…
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAlvomane
Shoehorn Holder for 34mm Railing Tubes | Schuhanzieher-/Schuhlöffel-Halter für 34mm Geländerrohre
These are three different shoehorn holders for mounting on 34mm tubes. Two M3x10 screws with a maximum head diameter of 5.5mm are required for mounting. The 27mm wide version in particular fits perfectly for a widely used strongly curved…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLionel Draghi
Shoehorn Clip
I got fed up with looking for my shoehorn at the bottom of the drawer, hidden among the shoes. So I made this simple clip to have it always on hand. No special constraint for printing, except the orientation, profile on the bed. This one…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesZotrax
Shoehorn holder for lobby cabinet
If you have shelf holes in your lobby cabinet, this is for you. Step-file included, if hole size is not 5mm.
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSiggi Bjarnason
Shoehorn hanger
Just a way to keep your large shoehorn handy
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesIoannis_Bo
Shoehorn holder round
No support structures are required. Simply print with the visible side down
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFMart
Hook shoehorn
Hook to hang a shoehorn on a shelf. Print the main part of the hook from the side to avoid using supports. I suggest printing with 0.2mm layer height, at least 4 walls (or perimeter), and at least 40% infill.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCristi
IKEA Shoehorn hook
I needed a holder for my IKEA shoehorn — it was easier to make it in Onshape than to search through the countless hooks on Printables :)
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDJGummikuh
Shoehorn holder
Shoehorn holder. Holds Shoehorns. Tape the small part onto a wall using a Tesa Powerstrip (Small size should exactly fit into the small retract). Make sure the rounded corners are facing upwards. Next, simply slide the knob over the…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printableschapsan2001
Magnetic shoehorn holder
Requiring two magnets (20x14.5x2 mm) and two screws with a wide flat cap (cap diameter 11 mm, screw diameter 4.5 mm), this small magnetic shoehorn holder will help you mount your shoehorn to a wall. Screw it to the wall, glue in the…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMircea
IKEA Skadis Adapter for Magnetic Shoehorn
IKEA Skådis Adapter for Magnetic Shoehorn I designed this to mount a wooden magnetic shoehorn holder onto a Skådis board. It’s much sturdier than the adhesive strips these holders usually come with, and it keeps everything looking clean.…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
Printablesquattro
Headphone Shoehorn
Those headband headphones are phantastic. However.. The fabric gets dirty over time and has to be washed. Of course without the electronics. Taking them out is easy, getting the speakers back in is hard. This tool helps to put the…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCesco3D
Shoehorn Holder
A simple and practical shoehorn holder designed to keep your shoehorn neatly stored and easy to reach. The holder can be mounted to a wall or other suitable surface. The open front makes it easy to insert and remove the shoehorn while…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesArthur Both
Long Shoe Horn - 200 mm Curved Shoehorn with Hanging Hole, No Supports (OpenSCAD)
Slip your shoes on without bending all the way down or crushing the backs: a long, curved shoe horn that narrows into a handle with a hanging hole. DETAILS • 200 mm long, 46 mm wide at the blade, 3.2 mm thick. • Prints standing up with no…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablestheSchoeli
IKEA TJUSIG magnetic shoehorn mount - magnetischer Schuhlöffelhalter
Diese Schulöffelhalterung ist für einen metallischen, magnetischen Schuhlöffel mit ca 46mm Breite am unteren Ende ausgelegt. Zwei Neodymmagnete mit 30x5x2mm halten ihn am oberen Teil ausreichend fest. Beide Teile werden auf die…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHBGK
Ikea Shoehorn Holder
very handy. I printed my first design and then developed it. it is a hollowed out design with no infill needed, 3mm thick walls. no supports needed, just split the objects and delete the one you dont want. smaller one is as effective and…
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
PrintablesZeroCreep
Shoehorn holder
Shoehorn holder printed from PLA, printed on Snapmaker J1S, 0.4mm nozzle
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTony Hanma
Shoehorn 170 mm (prints on edge)
Shoehorn with a gentle R60 channel. Printed on its straight edge so layers run along its length and it does not snap. 170 × 45 mm, 2.8 mm wall Curve stays within 22° of vertical: no supports Hanging hole How it was checked Checked with an…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Shoehorn OMTÄNKSAM holder IKEA
Holder for ikea OMTÄNKSAM shoehorn with space for magnets . Can be used without magnets.
P
Printables
Shoehorn remixed a little longer 16.5cm.
I printed with one edge on the plate and a brim around it. layers parallel to that edge and not straight down the shoehorn. I thought it might be a problem and was considering printing on a raft, but I no longer think that is necessary.
P
Printables
IKEA Skadis Adapter for Magnetic Shoehorn
IKEA Skådis Adapter for Magnetic Shoehorn I designed this to mount a wooden magnetic shoehorn holder onto a Skådis board. It’s much sturdier than the adhesive strips these holders usually come with, and it keeps everything looking clean.…
P
Printables
Schuhlöffel lang und verstärkt / Shoehorn long and reinforced
Material: 42 g ASA (PLA+?) Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein…
P
Printables
Long shoehorn
A robust long shoehorn for a daily use. Best printing with PETG (more robust and flexible). Objects must be printed lying down to increase sturdiness and post-printing is recommended (sanding and coating with vinyl glue of the back side).…