100 models
Start your day with something unique! I made a low poly version of a mini shoehorn, that I think looks cool. It works surprisingly well, and it's as easy to use as the original :) I printed it in PLA. Slicer settings : 0.20mm layer height…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Filament : GST 3D. Pla+ Support : None. G code. with All top-Ironing.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Wallmount for the best shoehorn from IKEA.
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
We got a new shoehorn which was too to big and too beautiful for the drawer. It is a famous i.e. amazon article which you can get in different length and from different sellers. It must be fixed like a sculpture and easily accessible for…
Print approx. €5.19–€6.34 excl. taxPreliminary estimate for PETGSource material: PET
These are three different shoehorn holders for mounting on 34mm tubes. Two M3x10 screws with a maximum head diameter of 5.5mm are required for mounting. The 27mm wide version in particular fits perfectly for a widely used strongly curved…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
print in 0.2mm layer height, with PETG, maximal perimeters, align your seam and some brim around it 11.08.2023 UPDATE: added V2 / smoother geometry
I've designed this holder for ikea shoehorns because they are always out of place or hanging on the edge of a sideboard so they fall off as soon as you get close. Now our shoehorn always hangs securely and in the right place. I printed…
Hello Makers, i designed an easy to print shoehorn, which can be heated and shaped in the oven. LEAVE A LIKE IF YOU LIKE IT <3 Print settings: no support no brim 3 perimeters 25% triangle infill about 1,5mm thick solid layers for Bottom…
Mini Schuhlöffel für unterwegs oder die Schublade. Gedruckt in PLA mit 25% Infill. Am Besten Schuhlöffel mit einem Band versehen. Den Schuhlöffel zuerst in den Schuh stellen, dann einsteigen und mit dem Band rausziehen.…
Easy to print with any material, 15% infill is enough. Supports not needed. - screw mount version added
Simple small shoe horn. Model size: 97 x 36 x 13 mm Added areas on the sides for easier printing. Printed with supports & brim Optimized for a 0.4 mm nozzle Layer height: 0.16 mm Material: PETG 2 wall loops Only 2 meters of filament, less…
Three versions, one that makes is touch the wall and two deeper one that makes the shoehorn hang 5mm or 10mm further out from the wall.
It's a salmon season here in the Pacific Northwest. It's always a good idea to have a shoehorn with you on the river, where you'll be changing your boots at least couple of times. I've designed and printed this shoehorn to keep it in my…
A strong shoe horn designed to aid with changing footwear on prosthetic legs/feet and other stubborn footwear. I would advise 4 perimeters if using a 0.4 nozzle and 23% cubic infill for strength. A 2-3mm brim is also a good idea.
20% fill PETG clear M3 double-sided tape on the back
The small shoehorn has a minimal honeycomb pattern typical of 3D printing. For durability, the shoehorn should be printed with PETG. The following print settings should be activated: Avoid crossing perimeters (Layers and perimeters)
Shoehorn to take with you with hole to attach on hook etc
Transform one of the most mundane items in your household into something special! This little plant lookalike holds 6 shoehorns in various sizes, both for adults and children. The pot can be filled with decorative materials for…
Easy and fast print, 0.3 layer. Its save shoe, nerves and time when you leave a home 😀✌
I introduced you a very simple 3D printed shoehorn :) Easy to print (picture shown the face to set as base) Recomended to print in PETG with skirt of 8 mm (GCode included) Hole in the end to get it hooked in the wall
Simple shoehorn hanger. Two variants - one with hole for screw and second one without it. Recommended print settings Resolution: 0.15 Supports: No
Designed as a functional shoe aid, this model combines practicality with detailed fantasy-inspired artwork. The long ergonomic shape helps guide your heel into the shoe while reducing strain when putting footwear on. In the download…
Easy to print with no support as shown at the images. This shoehorn holder is easy to srew behind and hidden to a sidewall of a furniture. You also can glue it with doublesided tape directly to the sidewall of a furniture. I suggest to…
Please print with filament that has high interlaminar strength and toughness. I used eSUN's ePLA-ST. I recommend a 0.15mm layer. You can print without the support, but it will print better if you use it. 積層間強度と靱性が高いフィラメントにてプリントしてください。…
Holder designated for Shoehorn OMTÄNKSAM (IKEA).
This is a remix of the model created by Wychall with some modifications. I printed this for an elderly person in need of a long shoehorn. The handle pieces were printed twice along with the shoehorn and handle end to make it a long 4 part…
Practical helper for your childrens, with favorite heroes.
Wall mount holder for IKEA OMTÄNKSAM shoehorn spoon and many other similar shoehorns Easy mount using only one screw Screw 4,5x55 (or 4x50) for best fit v2 - screw cap added for better look
Ikea's metallic shoehorn was always falling down or hidden in the closet, so I made a little and simple wall mount for it that prints quickly and is mounted to the wall with just one skrew. Can be customized by adding text in prusa slicer…
Mały hak do łyżki do butów, po powiększeniu w sliccer może służyć do wieszania innych, większych elementów, u mnie mały hak jest do łyżki do butów a powiększony do ubrań dla dziecka. Nie potrzeba podpór A small hook for a shoe horn, after…
This is a holder for the Ikea omtänksam shoehorn, its with and without screw mounting The screw is a normal wood-screw with 8mm head. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: .3 Infill: 10% Filament: Clash…
Just a simple shoehorn that prints in 30 minutes. It prints on its side, for maximum strength. Set perimeters to 3.
Material: 42 g ASA (PLA+?) Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein…
Wall mount for an IKEA OMTÄNKSAM shoehorn. Sized to fit 3M Command Strip velcro strips on a wall. Prints well rotated with the biggest wall vertical and the biggest side of the dome facing up. I used PLA, 20% infill and four walls with…
Hanger for one small and one big shoehorn PLA compatible
Wolf Shoehorn A unique 3D printable shoehorn featuring a detailed wolf head, paw prints, and forest-inspired engravings. Designed for everyday use while adding a striking decorative touch to your entryway, office, or cabin. Easy to print,…
printed at 20% infill PLA supports required fits M4 Screws
I made this model on Fusion 360, it works good for your house. You will have to print this shoehorn with petg, with pla you could risk to brake it. You will have to use supports to print this, print it with the longest part facing the…
a hook or holder for any kind of stuff, specially designed to hang a shoehorn. Fits all shoehorns up to 3cm in width. Can be hanged everywhere with adhesive on the backside.
Můj první vlastní model. Potřeboval jsem háček na lžíci na boty místo hřebíčku. Oproti obvyklým háčkům je plochý a zahnutá lžíce na něm lépe drží. Na spodní straně má 0,5mm drážku pro 19mm šírokou oboustrannou lepící pásku. Nakonec jsem…
I have designed this holder because we were putting them on top of the shoe cabinet, so every time you opened it from top, the shoehorns kept falling. It does not look gorgeous, but it does the job. It is designed for any shoehorn with at…
I have a grandma who likes to travel a lot and has trouble getting her shoes on. If you combine those 2 things you get the new compact shoe horn I designed. Fits in a keychain or just a pocket and is easy to use
Český popis Tento držák na nazouvací lžíci je praktickým doplňkem pro předsíň nebo botník. Udrží vaši nazouvací lžíci vždy na svém místě, takže ji už nikdy nebudete muset hledat. Model je navržený pro snadný 3D tisk bez podpěr. Lze jej…
Ein simples Modell zum Aufkleben auf einen Schrank um den Schuhlöffel daran einzuhängen. Ich hatte zuvor immer das Problem das der Schuhlöffel sobald man Ihn unbeabsichtigt berührte direkt runterfiel. Nun hält er an Ort und Stelle.…
Shoehorn with teeth. https://www.youtube.com/watch?v=YBBu5FLGquE I needed a shoehorn, so I thought “why not print one?”. And I found PhD3DP's model for one that had good reviews and downloaded that. But the damned song started going…
We have a metal shoehorn... so a little bit heavy... but my holder (on the cabinet) working well few weeks ago... I made two version... so you can download it with and without hole... if you wanna use double side tape. :) You can try it…
Material: 35 g ASA (PLA+?) Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Siehe auch / see also:…
This hook can be mounted using 3M VHB Tape or another double-sided tape. I've used it with the Ikea aluminium shoehorn, and it has stayed in place for over a year now.
Simple holder for IKEA metal shoehorn. It may hold other shoehorn, yet I'm not sure about fitting. Its designed to hold shoehorn in such position, so it doesn't hit furniture nor fall on the ground by itself. Printed on Ender 5 PRO with…
A robust long shoehorn for a daily use. Best printing with PETG (more robust and flexible). Objects must be printed lying down to increase sturdiness and post-printing is recommended (sanding and coating with vinyl glue of the back side).…
Holder for ikea OMTÄNKSAM shoehorn with space for magnets . Can be used without magnets.
I designed this shoehorn stand because our shoehorn never seemed to have a dedicated place and was always ending up somewhere different. I wanted a simple solution that would keep it easily accessible right next to the front door. While…
This is a shoehorn holder for the Ikea shoe rack (TJUSIG). We use it with the Ikea shoehorn (OMTÄNKSAM).
Print with 0,2mm Layer height Change Color start with yellow 0,8mm black 2,00mm red The colorchanging in Prusa illogical for me, so if that's the case for you then I recommend you to use the 3mf file! ;-) everything is set… Mounting with…
All the shoehorns I saw seemed boring and not tough enough. So after some sims and basic understanding of how physic works this beast was created. Some singularities while doing the FEA was not to avoid because of vertices that were fixed…
I printed with one edge on the plate and a brim around it. layers parallel to that edge and not straight down the shoehorn. I thought it might be a problem and was considering printing on a raft, but I no longer think that is necessary.
A shoehorn holder for owners of OMTÄNKSAM shoehorn and TWO (2) TJUSIG shoe racks (one on top of another). Print requires supports.
Shoehorn holder for an Ikea long shoehorn. This fits on top of a 14mm door width.
I made this small wall holder to keep my shoehorn in one place and easy to reach in the hallway. It’s sturdy, practical, and does the job well. Fits shoehorns up to 28 mm wide at the top. Size: Width: 36 mm Depth: 33 mm Screw holes: 3 mm…
Wall-mounted shoehorn designed for the IKEA OMTÄNKSAM series. It allows you to put on shoes comfortably without bending down and is always within easy reach thanks to its fixed position. Installation is done using strong mounting tape…
i would recommend using Petg for the Print cause you will need the flexibility for the snap. 0.2 mm Layers with 3 walls Also you should print it upright so the layeradhesion is not important for the snapmechanism
It is solving a very specific problem that my family and I have. But if you have this https://norrgavel.no/mobler/oppbevaring/posehyller/posehylle-med-4-poser-bjork and this…
Just add 4 3*6mm magnets and glue it where you want (silicon caulk or double sided tape works great)
I got fed up with looking for my shoehorn at the bottom of the drawer, hidden among the shoes. So I made this simple clip to have it always on hand. No special constraint for printing, except the orientation, profile on the bed. This one…
If you have shelf holes in your lobby cabinet, this is for you. Step-file included, if hole size is not 5mm.
Just a way to keep your large shoehorn handy
No support structures are required. Simply print with the visible side down
Hook to hang a shoehorn on a shelf. Print the main part of the hook from the side to avoid using supports. I suggest printing with 0.2mm layer height, at least 4 walls (or perimeter), and at least 40% infill.
I needed a holder for my IKEA shoehorn — it was easier to make it in Onshape than to search through the countless hooks on Printables :)
Shoehorn holder. Holds Shoehorns. Tape the small part onto a wall using a Tesa Powerstrip (Small size should exactly fit into the small retract). Make sure the rounded corners are facing upwards. Next, simply slide the knob over the…
Requiring two magnets (20x14.5x2 mm) and two screws with a wide flat cap (cap diameter 11 mm, screw diameter 4.5 mm), this small magnetic shoehorn holder will help you mount your shoehorn to a wall. Screw it to the wall, glue in the…
IKEA Skådis Adapter for Magnetic Shoehorn I designed this to mount a wooden magnetic shoehorn holder onto a Skådis board. It’s much sturdier than the adhesive strips these holders usually come with, and it keeps everything looking clean.…
Those headband headphones are phantastic. However.. The fabric gets dirty over time and has to be washed. Of course without the electronics. Taking them out is easy, getting the speakers back in is hard. This tool helps to put the…
A simple and practical shoehorn holder designed to keep your shoehorn neatly stored and easy to reach. The holder can be mounted to a wall or other suitable surface. The open front makes it easy to insert and remove the shoehorn while…
Slip your shoes on without bending all the way down or crushing the backs: a long, curved shoe horn that narrows into a handle with a hanging hole. DETAILS • 200 mm long, 46 mm wide at the blade, 3.2 mm thick. • Prints standing up with no…
Diese Schulöffelhalterung ist für einen metallischen, magnetischen Schuhlöffel mit ca 46mm Breite am unteren Ende ausgelegt. Zwei Neodymmagnete mit 30x5x2mm halten ihn am oberen Teil ausreichend fest. Beide Teile werden auf die…
very handy. I printed my first design and then developed it. it is a hollowed out design with no infill needed, 3mm thick walls. no supports needed, just split the objects and delete the one you dont want. smaller one is as effective and…
Shoehorn holder printed from PLA, printed on Snapmaker J1S, 0.4mm nozzle
Shoehorn with a gentle R60 channel. Printed on its straight edge so layers run along its length and it does not snap. 170 × 45 mm, 2.8 mm wall Curve stays within 22° of vertical: no supports Hanging hole How it was checked Checked with an…
Holder for ikea OMTÄNKSAM shoehorn with space for magnets . Can be used without magnets.
I printed with one edge on the plate and a brim around it. layers parallel to that edge and not straight down the shoehorn. I thought it might be a problem and was considering printing on a raft, but I no longer think that is necessary.
IKEA Skådis Adapter for Magnetic Shoehorn I designed this to mount a wooden magnetic shoehorn holder onto a Skådis board. It’s much sturdier than the adhesive strips these holders usually come with, and it keeps everything looking clean.…
Material: 42 g ASA (PLA+?) Druckereinstellung: Layerhöhe 0,2 / Infill 20 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / No Support Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein…
A robust long shoehorn for a daily use. Best printing with PETG (more robust and flexible). Objects must be printed lying down to increase sturdiness and post-printing is recommended (sanding and coating with vinyl glue of the back side).…
