IKEA Skadis Adapter for Magnetic Shoehorn
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for mounting a wooden magnetic shoehorn holder onto a Skådis board. It’s much sturdier than the adhesive strips
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
IKEA Skådis Adapter for Magnetic Shoehorn
I designed this to mount a wooden magnetic shoehorn holder onto a Skådis board. It’s much sturdier than the adhesive strips these holders usually come with, and it keeps everything looking clean.
Important Notes
Hardware: You'll need 4x wood screws (3.5mm x 12mm). Two screws are enough to make it sturdy, but I included four holes just in case.
Marking & Drilling: Use the printed mount as a template to mark your holes. I highly recommend pre-drilling with a 2mm bit so you don't split or crack the wood when driving the screws in.
Installation: The screws install from the back of the adapter so they’re hidden against the pegboard.
Credits
This uses the Skadis T-Clip System by Line Arc Line. The necessary clips are included in the profile.