IKEA Skadis Adapter for Magnetic Shoehorn
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for mounting a wooden magnetic shoehorn holder onto a Skådis board. It’s much sturdier than the adhesive strips
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
IKEA Skådis Adapter for Magnetic Shoehorn
I designed this to mount a wooden magnetic shoehorn holder onto a Skådis board. It’s much sturdier than the adhesive strips these holders usually come with, and it keeps everything looking clean.
Important Notes
Hardware: You'll need 4x wood screws (3.5mm x 12mm). Two screws are enough to make it sturdy, but I included four holes just in case.
Marking & Drilling: Use the printed mount as a template to mark your holes. I highly recommend pre-drilling with a 2mm bit so you don't split or crack the wood when driving the screws in.
Installation: The screws install from the back of the adapter so they’re hidden against the pegboard.
Credits
This uses the Skadis T-Clip System by Line Arc Line. The necessary clips are included in the profile.