Long Shoe Horn - 200 mm Curved Shoehorn with Hanging Hole, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slide shoes on without bending down or crushing the heel. A curved blade that narrows into the handle. 22 g.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Slip your shoes on without bending all the way down or crushing the backs: a long, curved shoe horn that narrows into a handle with a hanging hole.
DETAILS
• 200 mm long, 46 mm wide at the blade, 3.2 mm thick.
• Prints standing up with no supports: the curved blade rises straight from the bed (an 8 mm brim is set in the 3MF). Bambu Studio: 2 h 32, 22 g, no warnings.
• PETG flexes a little without snapping, which suits a shoe horn.
CUSTOMIZE (OpenSCAD)
Length (up to your printer's height) and blade width.
Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.