1 / 2
Long Shoe Horn - 200 mm Curved Shoehorn with Hanging Hole, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Long Shoe Horn - 200 mm Curved Shoehorn with Hanging Hole, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slide shoes on without bending down or crushing the heel. A curved blade that narrows into the handle. 22 g.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Slip your shoes on without bending all the way down or crushing the backs: a long, curved shoe horn that narrows into a handle with a hanging hole.

DETAILS

• 200 mm long, 46 mm wide at the blade, 3.2 mm thick.

• Prints standing up with no supports: the curved blade rises straight from the bed (an 8 mm brim is set in the 3MF). Bambu Studio: 2 h 32, 22 g, no warnings.

• PETG flexes a little without snapping, which suits a shoe horn.

CUSTOMIZE (OpenSCAD)

Length (up to your printer's height) and blade width.

Designed with AI assistance (OpenSCAD). Rendered images; not printed yet.

Tagi