Shoehorn wall bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We got a new shoehorn which is too to big and too beautiful for the drawer
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
We got a new shoehorn which was too to big and too beautiful for the drawer. It is a famous i.e. amazon article which you can get in different length and from different sellers.
It must be fixed like a sculpture and easily accessible for use. So here is the mounting. There are 4 files which enable invisible mounting and adjusting to your chosen length of the shoehorn.
The upper knob has two clamps inside to hold the ring.
I did this model right after my printer arrived and did testing of different materials. First I tried black PETG (free with printer), but my wife didn't loved the black knobs on the wall, so I reprinted the Covers with white ABS. Both worked fine.
You can mount the ground plate with countersunk screws up to 4.5 mm