Shoehorn Shoe Horn Schuhlöffel Shoespoon - Deformable in Oven
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A easy to print shoehorn which can be heated and shaped in the oven.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 816
- Wydruki
- 2
- Wyświetlenia
- 2748
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello Makers,
i designed an easy to print shoehorn, which can be heated and shaped in the oven.
LEAVE A LIKE IF YOU LIKE IT <3
Print settings:
- no support
- no brim
- 3 perimeters
- 25% triangle infill
- about 1,5mm thick solid layers for Bottom and Top
Tip: If the shoehorn is too big for your 3D printer, just resize it in your slicer.
I printed it on my Prusa XL with a 0.6 nozzle in PLA.
Instructions:
You need an oven. With PLA, this is heated to around 80-100 degrees Celsius. Of course, with other materials you need a different temperature. just try. (Optional: In order to obtain a more precise temperature value, this can be measured using a suitable measuring device.)
Now leave the shoehorn in the oven for about 5 minutes. Use baking paper as a base.
Then simply shape the shoehorn into the desired shape. My neighbor's shoehorn helped me shape it ;) But you can also use a tube or something round for an easier forming. That's it :D
