1 / 4
SHOEHORN IKEA OMSORG Holder; shoespoon, Schuhlöffel No support needed
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shoehorn holder can be either screwed behind the sidewall of furniture or either glued at the outside. Easy print
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 1234
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (17)Powiązane
Easy to print with no support as shown at the images.
This shoehorn holder is easy to srew behind and hidden to a sidewall of a furniture. You also can glue it with doublesided tape directly to the sidewall of a furniture. I suggest to position it about 100mm above the ground.
You can use either any PLA or PETG. Of course even stronger materials are also possible.