LED Replacement for LS Fanmod (Neptune 4 series)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sooner or later the stock Extruder LEDs can burn out and get dimm. This bracket will allow the use of standart component
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket is compatible with LS Fanmod in all varaints. Its using a standart 5mm LED bulb as a replacement for the stock led pcb. a single 5mm LED is bright enough to light everything around the nozzle.
What you need (BOM)
- 24V 5mm LED(white)
- 1x JST-zh 1.5 male connector
- Soldering or crimping equipment
Install
The LED will just firmly slide into the bracket. You can secure it additionally with a small drop of glue. You will need to solder or crimp the jst-zh connector on. You require ~120mm of cablelength. From here its just a matter of replacing the led+bracket thats on your LSFanmod with the one here.
Version log
v05 - initial release
-----
Feel free to buymeacoffee.com/lamarc