LED Replacement for LS Fanmod (Neptune 4 series)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sooner or later the stock Extruder LEDs can burn out and get dimm. This bracket will allow the use of standart component
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 59
- Makes
- 1
- Views
- 512
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket is compatible with LS Fanmod in all varaints. Its using a standart 5mm LED bulb as a replacement for the stock led pcb. a single 5mm LED is bright enough to light everything around the nozzle.
What you need (BOM)
- 24V 5mm LED(white)
- 1x JST-zh 1.5 male connector
- Soldering or crimping equipment
Install
The LED will just firmly slide into the bracket. You can secure it additionally with a small drop of glue. You will need to solder or crimp the jst-zh connector on. You require ~120mm of cablelength. From here its just a matter of replacing the led+bracket thats on your LSFanmod with the one here.
Version log
v05 - initial release
-----
Feel free to buymeacoffee.com/lamarc