1 / 7
Kadee conversion jigs for the USA Trains 60' Steel Boxcar — zdjęcie 1
1 / 7

Kadee conversion jigs for the USA Trains 60' Steel Boxcar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Jigs

Ocena
0 / 5
Polubienia
3
Pobrania
21
Wydruki
0
Wyświetlenia
330
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

Simple jigs to aid in cutting/filing a Kadee #904 G Scale Type E Straight Shank Coupler to replace the stock coupler.

I'm not crazy about the look of the “bell end” lol coupler box but this was a quick swap.

NOTES:

Jigs should be placed on the BOTTOM of the coupler.

Jig A is used to cut the length and notch out to reduce height.

Jig B is for carving/filing the side profiles to fit the whisker spring.

Drill 1.8mm hole 4.2mm from the end.

The coupler box cover is held with 4 VERY tiny screws.  Take care not to over tighten as they will strip!

Tagi