1 / 7
Kadee conversion jigs for the USA Trains 60' Steel Boxcar — image 1
1 / 7

Kadee conversion jigs for the USA Trains 60' Steel Boxcar

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Jigs

Rating
0 / 5
Likes
3
Downloads
21
Makes
0
Views
330
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial

Simple jigs to aid in cutting/filing a Kadee #904 G Scale Type E Straight Shank Coupler to replace the stock coupler.

I'm not crazy about the look of the “bell end” lol coupler box but this was a quick swap.

NOTES:

Jigs should be placed on the BOTTOM of the coupler.

Jig A is used to cut the length and notch out to reduce height.

Jig B is for carving/filing the side profiles to fit the whisker spring.

Drill 1.8mm hole 4.2mm from the end.

The coupler box cover is held with 4 VERY tiny screws.  Take care not to over tighten as they will strip!

Tags