10" Homelab Rack 1U Cable Management Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10" Homelab Rack 1U Cable Management Module
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 720
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to suit my own needs alongside other models I've uploaded on Printables
** NOTE: These Rack components were designed to fit a HOME MADE rack using rack rails and my supports to build a home made rack, therefore they may not fit your own store bought rack if you went down that path without a little modification - please check before printing. The designs are 250mm wide with a space between the upright rails being 220mm. Although some models within the range are slightly less than the 220mm. Please check before printing.
I wanted a 1U module that I could install Keystone jacks into for my lab purposes that would also allow cables to pass through, couldn't find anything on the market (plus wanted to design all my own rack) so created this to suit my needs.
2 Different Prints:
1U Module
Blanking plate to tidy up the face
You'll need threaded inserts to take full advantage of the build:
The 1U Blade uses 1x M3 Inserts
I've printed all mine in PETG (Galaxy Black) with 15% infil, no brim on the 1U Blade and organic supports on models that need it.