3U 10" Dual Slot Mini ITX Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3U mount for 10" racks, holds mini ITX motherboard and allow two PCIe cards via a riser
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 1231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
I wanted to mount an ITX board with two PCIe cards in my 10" rack, but wasn't able to find anything that allowed this specifically. Using heron's excellent model as a base I adapted it to suit this purpose. Using a PCIe extension cable and riser you can mount two single slot PCIe cards in 3U.
I used the following parts:
These seem to be easy to find on eBay and Amazon
Use standard PC case screws to mount the board, extension cable and PCIe cards, I recommend threading the holes first to make installation a bit easier. The PCIe mounting bracket can be attached with #4x½ screws or similar. I had to break the retention clip off of the extension cable to get it to fit correctly.
OpenSCAD file attached if you'd like to modify.